Troubleshoot/NVR/Troubleshoot Date and Time

Revision as of 16:45, 15 March 2016 by JP (talk | contribs)

How to set the date and time

Time display is not correct.

There are following possibilities:

  • Setup is not correct
  • Battery contact is not correct or voltage is too low.
  • Crystal is broken.

1. Make sure the "Time Zone" is set correctly.

DateandTimeTroubleshoot1.png

2. Setup DST, if applicable.

  • Daylight Savings Time begins the 2nd week of March
  • Daylight Savings Time ends the 1st week of November.

DateandTimeTroubleshoot2.png

3. "Sync PC" if all else fails.

DateandTimeTroubleshoot3.png

4. Click, "OK" to save your changes.

DateandTimeTroubleshoot4.png

Retrieved from "https://DahuaWiki.com/index.php?title=Troubleshoot/NVR/Troubleshoot_Date_and_Time&oldid=8372"