PTZPreset

How to Setup Preset

Description

Pre-sets are used to define single or multiple locations that are saved to the camera's internal memory. Pre-Sets are used in conjunction with the, "Tour" feature.

Pre-Requisites

• Dahua Network PTZ
• IP Address of Network PTZ
• Internet Explorer

Step by Step Instructions

1. Login to your IP PTZ camera via Internet Explorer.

Error creating thumbnail: Unable to save thumbnail to destination

2. On the right hand side, under, "PTZ Settings" click the drop down box and select, "Pre-Set"

Note:For this example, we are going to set Pre-Set 1 and 2. These numbers can be set from 1-80. The number of Pre-Sets available can vary from model to model.

3. Move the PTZ to the location you wish to set for Pre-Set 1 using the PTZ Controls.

4. Press, "Add"

5. Move the PTZ to the second location that you wish to establish for Preset 2 using the PTZ Controls.

6. Change the Pre-Set number to, "2" and click, "Add"

7. To test, change the Pre-Set back to, "1" and click, "Go to" then repeat for each additional Pre-Set you created.