Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
TestPage
[[Image:]][[Image:]][[Image:]][[Image:]][[Image:]][[Image:]][[Image:]][[Image:]][[Image:]][[Image:]][[Image:]]== CD-ROM Installation == Please follow the steps listed below.
| [[Image:]] | [[Image:]]
|
| # Open top cover and then remove the HDD bracket
|
# Take off the bottom of the HDD bracket and CD-ROM bracket.
|
| [[Image:]] | [[Image:]]
|
| # Fix the CD-ROM bracket at the HDD bracket.
|
# Install a pair of the CD-ROM bracket. Please make sure the reverse side is secure too.
|
| [[Image:]] | [[Image:]] |
| # Install SATA burner. Line up the SATA burner to the hole positions.
|
# User screwdriver to fix the screws.
|
| [[Image:]] | [[Image:]] |
| # Put the bracket back. Please adjust the CD-ROM to the proper position so that the button of the front panel is directly facing the pop-up button of the CD-ROM.
|
# Connect the SATA cable and power wire.
|
| [[Image:]] | |
| # Secure the HDD bracket and put the top cover back.
|
