Troubleshoot/NVR/HDMI Troubleshoot

Revision as of 04:16, 17 August 2016 by Qi (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

There is no HDMI output.

  • If Display is not set in HDMI mode then set to HDMI.
  • If The HDMI connection is not fully set in the connection then configure and reconnect HDMI.
  • If The HDMI connector is damaged then change the HDMI Cable.
  • If HDMI Cable is damaged then change HDMI Cable.
  • If Check if monitor is on the correct source setting then set to the correct source.
  • If DVR / NVR is set to a resolution that is unsupported by monitor then reset resolution.
300px-HDMI Logo.svg.png
Retrieved from "https://DahuaWiki.com/index.php?title=Troubleshoot/NVR/HDMI_Troubleshoot&oldid=15403"