Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.

NVR/Basic Setup/Smart Add

Revision as of 19:14, 23 October 2015 by JP (talk | contribs)

Smart Add

Accessing Smart Add

  • Method 1: From the startup wizard, click Smart add button.

NVRSmartAdd1.png

  • Method 2: On the preview interface, right click mouse and then select Smart add. Now you can go to the smart add interface.

NVRSmartAdd2.png

Smart Add Setup

NVRSmartAdd3.png

Click smart add button, you can see device enables DHCP function.

NVRSmartAdd4.png

System pops up the following interface for you to confirm IP information if there are several IP segments

NVRSmartAdd5.png

Now you can see system is auto adding IPC to the corresponding channels.

NVRSmartAdd6.png

You can see the following dialog box after system successfully added network cameras.

NVRSmartAdd7.png

Retrieved from "https://DahuaWiki.com/index.php?title=NVR/Basic_Setup/Smart_Add&oldid=1681"