USA/NVR/Lite/N42B2P
Contents
N42B2P
Features
- H.265 and H.264 Video Compression
- Maximum 200 Mbps Incoming Bandwidth
- Up to 8 MP Resolution for Preview and Playback
- Simultaneous HDMI and VGA Video Output
- Support for IPC and UPnP Protocols
- Eight (8) PoE Ports
- Support for Automatic Network Replenishment (ANR) Technology
Compression
Firmware
Firmware Update Instructions
- Instructions for Firmware Update via USB
- Instructions for Firmware Update via ConfigTool
- Instructions for Firmware Update via Internet Explorer
Firmware Update Download
Front Panel
Back Panel
NVR42/42-P/42-8P Series
The NVR42 series rear panel is shown as below.
The NVR42-P series rear panel is shown as below.
The NVR42-8P series rear panel is shown as below.
Specifications
| System | |
| Main Processor | Embedded Quad-core Processor |
| Operating System | Embedded Linux |
| Audio and Video | |
| IP Camera Input | Eight (8) Channels |
| Two-way Talk | Input: One (1) Channel, RCA |
| Output: One (1) Channe, RCA | |
| Display | |
| Interface | One (1) HDMI |
| One (1) VGA | |
| Resolution | 3840 x 2160, 1920 x 1080, 1280 x 1024, |
| 1280 x 720, 1024 x 768 | |
| Multi-screen Display | 1/4/8/9 |
| On-screen Display | Camera Title, Time, Video Loss, Camera Lock, Motion Detection, Recording |
| Recording | |
| Compression | H.265, H.264, MJPEG |
| Resolution | 8 MP, 6 MP, 5 MP, 4 MP, 3 MP, 1080p, 1.3 MP, 720p, D1, CIF, |
| Record Rate | 200 Mbps |
| Bit Rate | 16 Kbps to 20 Mbps per channel |
| Record Mode | Manual, Schedule (Regular, Continuous), Motion Detection (Video Detection, Motion Detection, Tampering, Video Loss), Stop |
| Record Interval | 1 to 120 minutes (default: 60 minutes) |
| Pre-record: 1 to 30 s | |
| Post-record: 10 to 300 s | |
| Video Detection and Alarm | |
| Trigger Events | Recording, PTZ, Tour, Alarm Out, Video Push, Email, FTP, Snapshot, Buzzer and Screen Tips |
| Video Detection | Motion Detection, MD Zones: 396 (22 x 18), Video Loss and Tampering |
| Alarm Input | Four (4) Channels, |
| Low Level Effective, Green Terminal Interface | |
| Relay Output | Two (2) Channels, |
| NO/NC Programmable, Green Terminal Interface | |
| Playback and Backup | |
| Sync Playback | 1/4/8 |
| Search Mode | Time/Date, Alarm, MD and Exact Search (accurate to one second), Smart Search |
| Playback Function | Play, Pause, Stop, Rewind, Fast Play, Slow Play, |
| Next File, Previous File, Next Camera, | |
| Previous Camera, Full Screen, Repeat, Shuffle, | |
| Backup Selection, Digital Zoom | |
| Backup Mode | USB Device, Network |
| Third-party Support | Dahua, Arecont Vision, AXIS, Bosch, Brickcom, Canon, CP Plus, Dynacolor, Honeywell, Panasonic, Pelco, Samsung, Sanyo, Sony, Videotec, Vivotek, and others |
| Network | |
| Interface | One (1) RJ-45 Port (10/100/1000 Mbps) |
| Ethernet Port | One (1) Independent 1000 Mbps Ethernet Port |
| PoE | Eight (8) Ports (IEEE802.3af/at) |
| Network Function | HTTP, HTTPs, TCP/IP, IPv4/IPv6, UPnP, RTSP, UDP, SMTP, NTP, DHCP, DNS, IP Filter, PPPoE, DDNS, FTP, Alarm Server, IP Search (Support for Dahua IP cameras, DVRs, NVS) |
| Maximum User Access | 128 Users |
| Mobile Operating System | IOS, Android |
| Interoperability | ONVIF 2.4, CGI Conformant |
| Storage | |
| Internal HDD | Two (2) SATA III Ports, |
| Up to 6 TB capacity for each HDD | |
| HDD Mode | Single |
| Auxiliary Interface | |
| USB | One (1) USB 3.0 Port |
| One (1) USB 2.0 Port | |
| Electrical | |
| Power Supply | 100 VAC to 240 VAC, 50/60 Hz |
| Power Consumption | NVR: < 9.6 W, without HDD |
