Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Access Control/How To Wire a RS485 Reader
Contents
How to wire Card Reader via RS-485 protocol
Description
This article is to show how to wire Dahua Card Reader to Dahua Access Controller using RS-485 Protocol.
An RS485 bus is capable of covering up to 1000m end to end, using twisted-pair cables. An RS485 bus can offer good immunity to electrical noise, making it ideal for interconnecting components around buildings.
Prerequisites
- ASC1204C/ASC1204B
- Dahua Card Reader
