Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Troubleshoot/NVR/P2P Troubleshoot
Revision as of 22:30, 5 October 2015 by JP (talk | contribs) (Created page with "===I can not use the P2P function on my cell phone or the WEB.=== There are following possibilities: *Check the device P2P function is enabled or not. (Main menu*>Setting*>Net...")
I can not use the P2P function on my cell phone or the WEB.
There are following possibilities:
- Check the device P2P function is enabled or not. (Main menu*>Setting*>Network*>P2P)
- Check the device is in the WAN or not.
- Check cell phone P2P login mode is right or not.
- It is the specified device P2P login port or not when you are using P2P client.
- Check user name or password is right or not.
- Check P2P SN is right or not. You can use the cell phone to scan the QR code on the device P2P interface (Main menu*>Setting*>Network*>P2P), or you can use the version information of the WEB to confirm. (For some previous series products, the device SN is the main board SN, it may result in error.)
