DSS S2/User Portal/Add Device Using Auto Register

Revision as of 00:14, 15 June 2019 by Edward (talk | contribs) (Step by Step Instructions)

Add Device Using Auto Register

Description

Prerequisites

Video Instructions

Step by Step Instructions

1. Login to the remote device.
1. Login To Device.PNG


2. Navigate to Setup->Network->Register. Fill in the Host IP of the DSS, 9500 (default port), and sub-Device ID (user-defined)
2. Enable Register.PNG


3. Login to the DSS on web UI.
3. Login To DSS on WebGUI.PNG


4. Click on "Device" to enable a pop-up window for adding the remote device to the DSS.
4. Adding Device to DSS.PNG


5. Under Device, click on "Add".
5. Adding Device to DSS part2.PNG


6. Do the following:
Under "Add Type", choose "Auto Register".
Under "Registration ID", put in any user-defined value that will be used. For example, we used "610" in the previous screenshot (sub-Device ID).
Under "User", it will be "admin".
Under "Password", it will be the password of the remote device.
6. Adding Device to DSS part3.PNG


7. Add in the "Device Name" or model number of the remote device.
"Type" will be depending on the devices being added. In this case, it will be a NVR.
"Video Channel" used in this case is 16 channels which also depends on the NVR/DVR if it's able to support.
7. Adding Device to DSS part4.PNG


8. Reboot the remote device.
8. Reboot The Remote Device.PNG


9. Check the status of the remote device on DSS, it should be stated as "online". Please allow some time if it's still stated as "offline" after the remote device is rebooted.
9. Check Remote Device on DSS GUI.PNG