Terminology

Revision as of 19:30, 13 January 2016 by Mark (talk | contribs)

4K
3840 pixels × 2160 lines UHD [Ultra High Definition]
720P
1280 pixels × 720 lines HD [High Definition]
8K
7680 pixels × 4320 lines FUHD [Full Ultra High Definition]
960H
960H is a new video standard for security systems that provides high resolution images using new advanced image sensors. Security cameras capable of 960H produce an image that is 960x480 compared to 702x480 for D1 and 352x240 for CIF.
1080P
1920 pixels x 1080 lines FHD [Full High Definition]
ACCESS CONTROL
The ability of restriction access to certain areas.
Alarm Input
Some DVRs and security cameras have alarm inputs, which can accept input from a sensor device such as a door contact or a passive infra-red motion detection which trigger the camera or DVR to take some action such as to begin recording.
Aperture
Controls how much light can go through the lens and sensor.
ATM
Automated teller machine
POS
Point of Sale, the place at which the goods are retailed.
Balun
A Video Balun enables the transmission of video using unshielded twisted pair wire instead of coaxial cable. The word "balun" comes from combining the terms balanced and unbalanced. The function of a balun is to transform an unbalanced signal into a balanced signal. When video signal is transmitted through coaxial cable, the distance traveled by the signal is limited because the signal is in the form of an unbalanced signal that is susceptible to Radio Frequency Interference or noise. Coax cable incorporates special shielding to minimize noise. Video Baluns transform the video signal into a balanced form in which each wire in the twisted pair transmits an identical signal with opposite polarized magnetic fields. Noise affects each signal equally. When the signals are combined, the noise is cancelled out. By using a designed balun, an unshielded twisted pair wire can transmit video for much longer distances than coax cable and with a lower cable cost
Bitrate
Byte transfer speed for every second it transfers. The unit is bps(bit per second).The higher the bitrate is, the more data it can transfer.
Blind zone
The area which is not detected in the image.
BNC Connector
BNC is a connector for coaxial cable that is most commonly used for CCTV installations.
Constant Bit Rate
CBR
Fixed sample rate compression. The advantage is fast compression, can be supported by most software and device, the disadvantage is the relatively large space
DAS
Direct Attached Storage
The traditional method of locally attaching storage devices to servers via a direct communication path between the server and storage devices.
DDNS
Dynamic Domain Name Service
A method of automatically updating a name server in the Domain Name System (DNS), often in Not Real Time, with the active DDNS configuration of its configured host names, addresses or other information. The term is used to describe two different concepts.
DECODE
This is a device, circuit, program, algorithm the would covert information from one media format to another. This would be the purpose of standardization, speed secrecy or comparison. The input signal to a video decoder is analog video that conforms to a standard format such as NTSC or PAL.
Definition of Internet
Wikipedia - The Internet is a large group of computers that are connected to each other. The Internet is used to send information quickly between computers around the world. It has millions of smaller domestic,academic, business, and government networks and websites, which together carry many different kinds of information (facts and details) and services. So in other words, the Internet is a network of networks.
Detection area
The area which is needed to be detected in the image.
Distance of network cable
We use the fiber to connect the countries. We only use network cable when it reaches to final clients. So it mainly depends on the fiber to communicate.
DOF calibration
rebuild environment 3-D information.
DVR
Digital Video Recorder.
EIS
Electronic image stabilization
Electronic image stabilization-ensures image is clear even if the camera is moving.
ENCODER
this is a device, circuit, program, alogorithm the would covert information from one media format to another. This would be the purpose of standarization, speed secrecy or comparision.
EXTRA STREAM
This is the secondary or third video output stream for access the DVR/NVR/IP Camera system from a remote location.
Failed alarm
it meets the rule condition but fails to trigger alarm.
False alarm
False alarm caused by interference source (light change, leaf waggling, rain & snow, small animals)
Field of view
The overall image displayed by the camera.
FTP
Termed as File transfer protocol, it is a network protocol for transfering files from one point to another over the TCP based network, ie: the internet.
H.264
The intent of the H.264/AVC project is to create a standard capable of providing good video quality at substantially lower bit rates than previous standards, without increasing the complexity of design so much that it would be impractical or excessively expensive to implement.
HD
FHD
UHD
FUHD
HD is an abbreviation for High Definition and typically refers to resolutions that are higher than 1280x720. The most common formats are 720P/HD, 1080P/Full HD, 4K/UHD and 8K/FUHD
HDCVI
In November 2012, Dahua technology released analog high-definition transmission interface technology-HDCVI(High Definition Composite Video Interface), with self-owned intellectual property right. HDCVI technology is a HD video transmission method, based on existing RG-59 or RG-6 coaxial cable. It can achieve long distance HD video signal reliable transmission at low cost via low general coaxial cable. In the practical application, HD-SDI subsystem requires high transmission medium, while HDCVI is suitable to the long distance, low cost transmission medium and complex deployment situation.
HEVC
H.265
Also known as High Efficiency Video Coding, is a successor to H.264 (MPEG-4) and saves 50% bandwidth & HDD also supports 4K with 4ch@7fps or 1ch@30fps.
HDD
Also known as Hard Disk Drive, it is a device that would store files like documents or in our case video recorded files as a digital file.
I Frame Interval
the interval time between every two I frame, I-frame is called intra-picture, P-frame is called prediction picture. I-frame need more space and the best image quality.
IP 66
IP code (Ingress Protection) that indicates the degree of protection provided by enclosures for electrical equipment. The first number indicates protection of internal equipment against the ingress of solid foreign objects. The second number indicates protection of internal equipment against harmful ingress of water. Higher digits refer to higher levels of protection
IP Cam (Network Camera)
IPC
IP Camera
Network Camera
An Internet protocol camera, or IP camera, is a type of digital video camera commonly employed for surveillance, and which, unlike analog closed circuit television (CCTV) cameras, can send and receive data via a computer network and the Internet.
IR LEDs
Illuminates image in the night. Infrared light emitted by the light, wavelength of 850nm and 940nm, are not visible , energy saving, the past 10 years, it has been widely used in the field of security monitoring
ISCSI
IP Small Computer System Interface.
IVS
Intelligent Video Surveillance-Estimate the camera’s internal parameters (including internal geometric features, optical features) and external parameters (the camera’s 3D location and direction relative to the real coordinate system) according to one horizontal line and three altitude lines calibrated by users, then confirm the corresponding relations between the 2D image captured by the camera and real 3D object.
LAN
Local Area Network
A local area network (LAN) is a group of computers and associated devices that share a common communications line or wireless link. For example, an enterprise network is generally a local area network. A network of large-scale video surveillance project is a local area network.
LUX
Unit of light illuminance used as a measure of low-light recording capacity in security cameras. Cameras with a Lux rating of 0.2 Lux or less would be considered low-light cameras. It is not possible to get good color definition in low light levels, so in general low light cameras are always black and white. Day/night cameras use electronics to switch from color during the daytime, to black/white during night or low light conditions. Many low light cameras also use infrared, which is useful in zero light conditions. The lower the LUX rating of a camera, the better it will see in low light.
MAC Address
MAC is the ID of the computer. Each computer has its own identity. It is unique around the world. The Mac address is binding with the device once it is produced. Usually we do not modify it. Of course, we can use COM to change its setup.
MAIN STREAM
This is the main video output stream feeds for the camera or channels that is for a local remote use, meaning within network.
Minumum Illumination
Min Illumination
Minimum illumination is a parameter to show the camera‘s performance in the night or low light scene. The smaller the value is ,the higher the sensitivity of the sensor is.
MJPEG
M-JPEG
Motion JPEG
Motion JPEG (M-JPEG or MJPEG) is a video compression format in which each video frame or interlaced field of a digital video sequence is compressed separately as a JPEG image.
Multicast
It is to allow the NVR/DVR to work more efficently by steaming one access feed and letting the Router device distribute the video feed to multiple devices.
NAS
Network Attached Storage
a file-level access storage architecture with storage elements attached directly to a LAN.
NVR
Network Video Recorder.
ONVIF
A global and open industry forum with the goal to facilitate the development and use of a global open standard for the interface of physical IP-based security products. Or in other words, to create a standard for how IP products within video surveillance and other physical security areas can communicate with each other
ONVIF/PSIA
PSIA
These protocol regulate the function of application interface. By these protocol, not only DAHUA IPC could be accessed to DAHUA NVR, but also others brands that support ONVIF or PSIA. And all over network devices, which support ONVIF or PSIA, could communicate each other.
OSD (On Screen Display)
A method or on screen menu of displaying set-up information and/or instructions on a display monitor.
PAL
PAL is an abbreviation for Phase Alternating Line. This is the television display standard that is used mainly in Europe, China, Malaysia, Australia, New Zealand, the Middle East, parts of Africa, and other parts of the world. PAL uses 625 lines per frame and a frame rate of 25 frames per second.
P2P
Is a network point to point access without compromising the Router or modem's firewall.
Power over Ethernet
POE
Power over Ethernet. By this technology, we could transmit the network signal not only with single cable, but also the power supply. (MAX. Distance 100 Meter)
PreRecord
Pre-Record
You can set pre-record time(from 1-30s), this function can extend the life of HDDs and help to analysis MD/Alarm video( you can refer the event part )
PTZ
An acronym for Pan Tilt and Zoom.
RS-232
RS-232 is a communications standard for serial communications between devices. In CCTV, this can be communication between a contoller and a surveillance camera. The RS-232 standard allows for the connection of two devices through a serial link, and is the protocal used for serial connections in computers. RS-485 allows for serial connections between more than 2 devices on a networked system and is defined below.
RS-485
RS485, also referred to as EIA-485 is a communications standard for serial communication between devices. When talking about surveillance systems, RS-485 is typically used as the protocal to allow computers and remote controllers to control the activity of cameras such as pan, tilt, rotate, and zoom operations. RS485 is an updated version of the original serial protocol, RS-232.
RAID
Known as Redundant Array of Independent Disks, a technology that is used to increase the performance and/or reliability of data storage.
Resolution
The resolution of a camera is often limited by the image sensor that turns light into discrete signals. The brighter the image at a given point on the sensor, the larger the value that is read for that pixel.
ROI
Region of Interest- allows cameras to enhance image quality of region of interest by decreasing non-ROI’s image quality to acquire more computing power and bandwidth.
RTSP
Real time Streaming Protocol is a network protocol that was designed for the use in Entertainment and Video Communication systems to control the video servers. The use was for the establishment and controling media sessions between the two points.
SAN
Storage Area Network
A network that provides access to consolidated, block level data storage.
Sensitivity
The difficulty level of target detection and alarm, the higher the sensitivity is, the easier it is to detect, but with more false alarms; the lower the sensitivity is, the less false alarm will be, but with more failed alarms.
Size filter
Only reserve the target which meets the requirement of size (width height/area) and aspect ratio.
Smart detection
tripwire, intrusion detection, abandoned/missing, scene change, defocus, facial detection and audio detection, allowing automatically detect under rulemaking and trigger alarms, accordingly.
Signal to Noise Ratio (S/N Ratio)
This is the ratio between the signal strength and the noise levels on an audio or video signal.
SSD
Solid State Drive, a solid-state storage device that uses integrated circuit assemblies as memory to store data persistently.
SUB STREAM
This is the secondary or third video output stream for access the DVR/NVR/IP Camera system from a remote location.
Target
Moving object with some certain type (such as human, vehicle and etc.) which appears in the field.
TCP/UDP
TCP
UDP
These protocol regulate the transmission method of network signal of IP equipments. By these protocol, we realized our DAHUA IPC to access our DAHUA NVR, and all over the DAHUA network devices could communicate each other.
Tripwire Function
Only applied to the scene where the targets are sparse and there is rarely any covering between targets, such as the perimeter without any guard. It will trigger alarm when the target passes through the warning line according to the set movement direction. It takes some time from the target appears to the target is confirmed, so it needs to leave some space when setting warning line, do not set it near the covering. Detect if there is any object crossing the warning line, it can support different direction selection, such as A->B, B->A and bidirectional, and it can activate record , snapshot and alarm according to the judgment result.
Variable Bit Rate
VBR
without a fixed bit rate, in the compression software, determined by the instant video data bit rate, quality taking into account.
Varifocal (Zoom)
This refers to a type of lens that has the capability to change the focal length. This allows adjustment of the magnification and field of view of the security camera.
WDR (Wide Dynamic Range)
Used for capturing clear images of objects surrounded by a strong back light, while still keeping the background visible.