Template:Product Point to Point
Revision as of 21:32, 19 November 2019 by Carlos (talk | contribs) (→Step by Step Instructions for Wireless Transmission Devices)
Contents
Product
NOTE
DO NOT MIX GENERATION 1 and GENERATION 2 DEVICES!
Networking Mode
Point to Point | 400px |
Point to Multipoint | 400px |
Information
- 192.168.1.36 is default IP
- Default User Name = admin
- Default Password = admin
- DHI-PFWB5-10n-Station, square unit, satellite
- DHI-PFWB5-90n-Access Point, long skinny unit, Home Base
Operating Modes
802.11n:
- Access Point (autoWDS),
- Access Point (TDMA 2)
- Access Point (TDMA 3)
- Station (WDS/TDMA 2/TDMA 3)
- Station (ARPNAT)
802.11ac:
- Access Point (autoWDS)
- Access Point (TDMA3)
- Station (WDS/TDMA 3)
Step by Step Instructions for Wireless Transmission Devices
- It is best to setup these device on a bench before installing them.
- Power on and Configure one device at a time, they all have the same default IP address.
- Always use the included POE injector on all configurations.
- What is in the BOX - DH-PFWB5-10ac.
1. Give your PC a IP address of 192.168.1.200
2. Connect to the DH-PFWB5-10ac to your PC using a patch cable.
3. ping the IP address of the DH-PFWB5-10ac (192.168.1.36) to make sure it is alive.
4. Using IE or Chrome type the IP address on a browser.
5. Main menu screen.