USA/NVR/Lite/DHI NVR42A08 8P

DHI-NVR42A08-8P

DHI-NVR42A08-8P

Specifications	Quick Start Guide	Manual	Firmware
	Coming Soon		Build Date: 06-12-2017

Features

• Up to 8/16/32 channel IP camera input
• H.264/MJPEG dual codec decoding
• Max 200Mbps incoming bandwidth
• Up to 5Mp resolution preview&playback
• HDMI/VGA simultaneous video output
• 4/8/16 channel synchronous realtime playback, GRID interface
• Support Multi-brand network cameras: Dahua, Arecont Vision, AXIS, Bosch, Brickcom, Canon, CP Plus, Dynacolor, Honeywell, Panasonic, Pelco, Samsung, Sanyo, Sony, Videotec, Vivotek and etc.
• ONVIF Version 2.4 conformance
• 3D intelligent positioning with Dahua PTZ camera
• Support 2 SATA HDDs up to 8TB, 2 USB(1 USB3.0)
• Support IPC UPnP,8PoE ports
• Multiple network monitoring: Web viewer, CMS(DSS/PSS) & DMSS

Compression

• Error creating thumbnail: Unable to save thumbnail to destination

  Products with H.264

• Error creating thumbnail: Unable to save thumbnail to destination

  Products with H.264 Plus

Intelligent Features

• Error creating thumbnail: Unable to save thumbnail to destination

  Abandoned/Missing

• Error creating thumbnail: Unable to save thumbnail to destination

  Tripwire

• Error creating thumbnail: Unable to save thumbnail to destination

  Intrusion

Firmware

Firmware Update Instructions

• Instructions for Firmware Update via USB
• Instructions for Firmware Update via ConfigTool
• Instructions for Firmware Update via Internet Explorer

Firmware Update Download

Build Date: 06-12-2017

Firmware Changelog

• Build Date: 04/09/2016
• Support H.264+, English, Spanish, Frech optional, Default English, NTSC

Interfaces

+DHI-NVR42A08-8P	+
Series:	Lite
Compression:	H.264/MJPEG
Channels:	8
Input Bandwidth:	200Mbps
Record Bandwidth:	200Mbps
Max Decode:	4ch@4MP, 4ch@1080P
Video Output:	1 HDMI, VGA
HDD:	2x4TB
RAID:	-
eSATA:	0
Mini SAS:	0
Audio In:	1
Audio Out:	1
Alarm In:	4
Alarm Out:	2
Network:	1 Gigabit Ports
POE:	8
USB:	1 USB 3.0, 1 USB 2.0
Power:	AC100V~240V, 50~60Hz, Redundant<40W(No HDD)

SystemUI Old	WebUI Old	SmartPSS	DSS Express S

Front Panel

Error creating thumbnail: Unable to save thumbnail to destination

NVR42-8P-4K Series

The NVR42-8P-4K series rear panel is shown as below.

Icon	Port Name	Function
Power socket	/	Input AC 220V.
Power switch	/	Power on/off button.
PoE  PORTS	PoE port	Built-in Switch，support PoE. The PoE PORTS can provide power to the network camera.   The 8 PoE ports series product can support 48V 120W.
Network port	10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable.
HDMI	High Definition Media Interface	High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.4.
USB3.0 port	USB3.0 port. Connect to mouse, USB storage device, USB burner and etc.
RS-232	RS-232 debug COM.	It is for general COM debug to configure IP address or transfer transparent COM data.
VGA	VGA video output port	VGA video output port. Output analog video signal. It can connect to the monitor to view analog video.
MIC IN	Audio input port	Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup.
MIC OUT	Audio output port	Audio output port. It is to output the analog audio signal to the devices such as the sound box. Bidirectional talk output. Audio output on 1-window video monitor. Audio output on 1-window video playback.
1～4	Alarm input port 1～4	They are to receive the signal from the external alarm source. There are two types; NO (normal open)/NC (normal close). When your alarm input device is using external power, please make sure the device and the NVR have the same ground.
GND	Alarm input ground port.
N1,N2	Alarm output port 1～2	2 groups of alarm output ports.（group 1：port NO1～C1, group 2：port NO2～C2）. Output alarm signal to the alarm device. Please make sure there is power to the external alarm device. NO：Normal open alarm output port. C：Alarm output public end.
C1～C2
A	RS-485 communication port	RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ.
B		RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ.