USA/NVR/Lite/DHI NVR42A08 8P
DHI-NVR42A08-8P
| Specifications | Quick Start Guide | Manual | Firmware |
|---|---|---|---|
| Coming Soon |
Build Date: 06-12-2017
|
| Series: | Lite |
| Compression: | Smart H.264+ /MJPEG |
| Channels: | 8 |
| Input Bandwidth: | 200Mbps |
| Record Bandwidth: | 200Mbps |
| Max Decode: | 4 channel 4MP@20fps 8ch 1080p@30fps |
| Video Output: | 1 HDMI, 1 VGA |
| HDD: | 2 SATA III Ports Up to 12 TB capacity for each HDD |
| RAID: | - |
| eSATA: | 0 |
| Mini SAS: | 0 |
| Audio In: | One (1) Channel, RCA |
| Audio Out: | One (1) Channel, RCA |
| Alarm In: | 4 |
| Alarm Out: | 2 |
| Network: | 1 Gigabit Port |
| POE: | 8 ports (IEEE802.3at/af) |
| USB: | 1 USB 3.0, 1 USB 2.0 |
| Power: | 100 to 240 VAC, 50/60Hz <20W (No HDD) |
| IVS: | Yes, maximum of (4) IP channels |
| Fisheye Dewarp: | No |
| POS: | No |
Features
- Up to 8/16/32 channel IP camera input
- H.264/MJPEG dual codec decoding
- Max 200Mbps incoming bandwidth
- Up to 5Mp resolution preview&playback
- HDMI/VGA simultaneous video output
- 4/8/16 channel synchronous realtime playback, GRID interface
- Support Multi-brand network cameras: Dahua, Arecont Vision, AXIS, Bosch, Brickcom, Canon, CP Plus, Dynacolor, Honeywell, Panasonic, Pelco, Samsung, Sanyo, Sony, Videotec, Vivotek and etc.
- ONVIF Version 2.4 conformance
- 3D intelligent positioning with Dahua PTZ camera
- Support 2 SATA HDDs up to 8TB, 2 USB(1 USB3.0)
- Support IPC UPnP,8PoE ports
- Multiple network monitoring: Web viewer, CMS(DSS/PSS) & DMSS
Compression
- Error creating thumbnail: Unable to save thumbnail to destination
- Error creating thumbnail: Unable to save thumbnail to destination
Intelligent Features
- Error creating thumbnail: Unable to save thumbnail to destination
Abandoned/Missing
- Error creating thumbnail: Unable to save thumbnail to destination
Tripwire
- Error creating thumbnail: Unable to save thumbnail to destination
Intrusion
Interfaces
|
|
|
|
|---|---|---|---|
| SystemUI Old | WebUI Old | SmartPSS | DSS Express S |
Front Panel
Back Panel
NVR42-8P-4K Series
The NVR42-8P-4K series rear panel is shown as below.
|
Icon |
Port Name |
Function |
|
Power socket |
/ |
Input AC 220V. |
|
Power switch |
/ |
Power on/off button. |
|
PoE PORTS |
PoE port |
Built-in Switch，support PoE. The PoE PORTS can provide power to the network camera. The 8 PoE ports series product can support 48V 120W. |
|
Network port |
10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable. | |
|
HDMI |
High Definition Media Interface |
High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.4. |
|
USB3.0 port |
USB3.0 port. Connect to mouse, USB storage device, USB burner and etc. | |
|
RS-232 |
RS-232 debug COM. |
It is for general COM debug to configure IP address or transfer transparent COM data. |
|
VGA |
VGA video output port |
VGA video output port. Output analog video signal. It can connect to the monitor to view analog video. |
|
MIC IN |
Audio input port |
Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup. |
|
MIC OUT |
Audio output port |
Audio output port. It is to output the analog audio signal to the devices such as the sound box.
|
|
1～4 |
Alarm input port 1～4 |
|
|
GND |
Alarm input ground port. | |
|
N1,N2 |
Alarm output port 1～2 |
|
|
C1～C2 | ||
|
A |
RS-485 communication port |
RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ. |
|
B |
RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ. |
Specifications
|}
