DDNS/Quick DDNS Setup

Revision as of 16:09, 2 March 2016 by Mark (talk | contribs)

Enabling Quick DDNS from Local Recorder

Please Note you must have Device connected to the internet in order for the DDNS account to be registered. 


Step 1. From the Main Menu Select Network > Select DDNS > Check off the Enable box


Step 2. Select DDNS type from the Drop Down menu. Please Note depending on the model of the recorder you will have either Dahua DDNS or Quick DDNS as one of the options from the drop down menu.

After DDNS is selected it will automatically generate a Host IP. In this case because Dahua DDNS is an option it is www.dahuaddns.com . If Quick DDNS is an option it will automatically generate www.quickddns.com as the host IP.


Step 3. Select either Default Domain or Custom Domain Name. By Selecting Default Domain a Domain Name for the device recorder is automatically generated. eg.4C11BF0B0436.dahuaddns.com. By selecting Custom Domain name you may choose a custom name up to 18 characters.


Step 4. Input your email address > Select "Test" and if successful you will be prompt with "Successfully Registered" > Select "Yes" > Select "Apply" > Select "OK" to save settings.