Access Control/Products/DHI-ASC3202B
DHI-ASC3202B
| Specifications | Manual | Firmware |
|---|---|---|
Build Date: 03-06-2024
|
| FAQs | |
|---|---|
| Q: Why are my Mifare cards being read as decimal? | A: By default the controller will have the card no system set to decimal. In order to change the setting you will need to disable HID support then go to Person Management > Card No. System > Select Hexdecimal |
| Q: Why don't entries display "User ID" and "Username" when unlocking with PIN codes in DHI-ASC3202B? | A: When "PIN Code Authentication" is enabled, it takes precedence over the information displayed in the logs. As a result, the username and user ID are no longer shown, as users no longer need to include the user ID when entering their password. |
Wiring Diagrams:
Overview
RS485
Wiegand
Accessories
Magnetic Locks and Electric Strikes:
Wiring of Dual Magnetic Locks with PoE (12V and Relay)
Wiring of Dual Magnetic Locks with 12 V External Power Supply (12 V and Relay)
Wiring of Dual Magnetic Locks with 12 V External Power Supply (Relay)
Wiring of 2-in-1 Magnetic Lock with 12 V External Power Supply (Relay)
Wiring of Dual Electric Strikes with PoE
Wring of Dual Electric Strikes with 12 V External Power Supply
