Troubleshoot/NVR/Display Troubleshoot

Revision as of 00:39, 27 April 2016 by Qi (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

The displayed video is not full in the monitor.

Please do the following:
Check your physical connections from the system to the monitor.
If a VGA connection, ensure the screws are tight.
If a DVI connection, also ensure the screws are tight.
On the monitor check the current resolution setup. If the current setup is 1920*1080, then you need to set the monitor resolution as 1920*1080 or 1080P capable.

Retrieved from "https://DahuaWiki.com/index.php?title=Troubleshoot/NVR/Display_Troubleshoot&oldid=9851"