VideoLossCam

After I connected to the IP channel, there one*window output is OK, but there is no multiple*window output.

There are following possibilities:

  • Lower, FPS, Bitrate, change CBR to VBR and set to sub-stream on some of the cameras.
  • Check the sub stream of the camera has been enabled or not.
  • Check the sub stream type of the camera is H.264 or not.
  • Check the device supports camera sub stream resolution or not (such as 960H, D1,CIF,etc.)
Sub stream web enable.jpg
Retrieved from "https://DahuaWiki.com/index.php?title=VideoLossCam&oldid=15837"