Difference between revisions of "3rd Party VMS/Milestone/Setup Smart H.265 Plus"

 
Line 1: Line 1:
 
=Setup Smart H.265+ in Milestone=
 
=Setup Smart H.265+ in Milestone=
 
===Compatible Devices===
 
===Compatible Devices===
*NK8BA4I using firmware: [https://dahuawiki.com/images/Firmware/DH_IPC-HX8XXX-Nova_EngSpnFrn_N_Stream3_V2.620.0000.0.R.20170620.zip DH_IPC-HX8XXX-Nova_EngSpnFrn_N_Stream3_V2.620.0000.0.R.20170620]
+
*NK8BR4 using firmware: [[http://dahuawiki.com/images/Firmware/DH IPC-HX8XXX-Nova2 EngSpnFrn N Stream3 V2.622.0000001.4.R.171107.zip]]
 
===Description===
 
===Description===
 +
This article will show how to set up H.265+ in Milestone
 
===Prerequisites===
 
===Prerequisites===
===Video Instructions===
+
*Dahua H.265+ smart codec compliant camera
<embedvideo service="youtube">https://www.youtube.com/watch?v=EXAMPLE</embedvideo>
+
*X Protect 2017 R3
 
===Step by Step Instructions===
 
===Step by Step Instructions===
1.
+
1.Log in to the camera's WEB UI and under the video encode settings turn on H.265 and save it
 +
 
 +
[[File:H.265+ Milestone1.png|800px]]
 +
 
 +
2.Enable Smart Codec and after saving it, the camera will prompt you to reboot. Click on "Ok"
 +
 
 +
[[File:H.265+ Milestone2.png|800px]]
 +
 
 +
3. Open XProtect Management Client and under devices click on "Cameras"
 +
 
 +
[[File:H.265+ Milestone3.png|800px]]
 +
 
 +
4.Select your camera and enter the "Settings" tab. Change the codec to H.265
 +
 
 +
'''Note''': You will not get a smart codec option but do not worry, the smart codec is in effect.
 +
 
 +
[[File:H.265+ Milestone4.png|800px]]
 +
 
 +
5.Save the settings to finalize the setup.
 +
 
 +
[[File:H.265+ Milestone5.png|800px]]

Latest revision as of 17:38, 12 February 2018

Setup Smart H.265+ in Milestone

Compatible Devices

Description

This article will show how to set up H.265+ in Milestone

Prerequisites

  • Dahua H.265+ smart codec compliant camera
  • X Protect 2017 R3

Step by Step Instructions

1.Log in to the camera's WEB UI and under the video encode settings turn on H.265 and save it

H.265+ Milestone1.png

2.Enable Smart Codec and after saving it, the camera will prompt you to reboot. Click on "Ok"

H.265+ Milestone2.png

3. Open XProtect Management Client and under devices click on "Cameras"

H.265+ Milestone3.png

4.Select your camera and enter the "Settings" tab. Change the codec to H.265

Note: You will not get a smart codec option but do not worry, the smart codec is in effect.

H.265+ Milestone4.png

5.Save the settings to finalize the setup.

H.265+ Milestone5.png