Difference between revisions of "Access Control/How To Default Access Control"

(Description)
(Option 2: hard reset using DIP switch)
 
(9 intermediate revisions by the same user not shown)
Line 3: Line 3:
 
This article to show you how to default the access controller unit to factory settings.
 
This article to show you how to default the access controller unit to factory settings.
  
==Prerequisites==
+
==Pre-requisites==
1. ASC1204C ASC1204B - Firmware must be newer than 10/29/2015.
+
1. ACS Config Tool.
2. Computer with ConfigTool software installed.
+
 
 +
Click Here To Download ASC Config Tool.[https://dahuawiki.com/images/Files/Software/ACS_ConfigTool/ACSConfig.zip <ul class="fa-ul"> <li><i class="fas fa-arrow-alt-circle-down fa-4x" style="color:darkred;></i></li></ul>]
 +
 
 +
2. Computer that connected to the same network as Access Controller
  
 
==Step by Step Instruction==
 
==Step by Step Instruction==
1. Launch your ConfigTool software to confirm the firmware of Access Controller.
 
Note: If the firmware is older than 10/29/2015, you must perform a firmware update first.
 
  
2. Locate the DIP switch on the Access Controller, and turn on DIP switch number 1, 3, 5, and 7.
+
===Option 1: Using ACS Config Tool===
 +
 
 +
1. Launch ACS Configtool.
 +
 
 +
[[File:ASC1204_Time_Sync_1.png|700px]]
 +
 +
2. Click on '''Search Settings''', and then enter the password of access controller. Click '''Ok'''.
 +
 
 +
[[File:ASC1204_Time_Sync_2.png|700px]]
 +
 
 +
[[File:ASC1204_Time_Sync_3.png|700px]]
 +
 
 +
3. Go to System Settings.
 +
 
 +
[[File:ASC1204_Time_Sync_4.png|700px]]
 +
 
 +
4. Select the device by putting the checkmark on the device IP address.
 +
 
 +
[[File:ASC1204_Time_Sync_5.png|700px]]
 +
 
 +
5. Click on '''Restore''' menu tab.
 +
 
 +
[[File:ASC1204_Restore.png|700px]]
 +
 
 +
6. Click on '''Default'''. The controller will beep and perform the hard reset.
 +
 
 +
[[File:ASC1204_Default.png|700px]]
 +
 
 +
  '''Note: Using Option 1, the IP address of controller will not be reset. Only the door permission and access control log that will be removed.'''
  
3. Reboot the device by unplugging unit from the power, or using SmartPSS software.
 
  
4. Wait until the unit completely boot back up, and then turn off DIP switch number 1, 3, 5, and 7.
 
  
5. Reboot the device again.
+
===Option 2: hard reset using DIP switch===
 +
[[file:ASC1204B_Reset.jpg|600px]]
  
6. Your access controller is now set to factory default settings.
+
Your access controller is now set to factory default settings.
 +
'''IP Address:''' 192.168.0.2            '''Username:''' admin                '''Password:''' 123456

Latest revision as of 19:56, 29 December 2020

How to default access controller unit

Description

This article to show you how to default the access controller unit to factory settings.

Pre-requisites

1. ACS Config Tool.

Click Here To Download ASC Config Tool.

2. Computer that connected to the same network as Access Controller

Step by Step Instruction

Option 1: Using ACS Config Tool

1. Launch ACS Configtool.

ASC1204 Time Sync 1.png

2. Click on Search Settings, and then enter the password of access controller. Click Ok.

ASC1204 Time Sync 2.png

ASC1204 Time Sync 3.png

3. Go to System Settings.

ASC1204 Time Sync 4.png

4. Select the device by putting the checkmark on the device IP address.

ASC1204 Time Sync 5.png

5. Click on Restore menu tab.

ASC1204 Restore.png

6. Click on Default. The controller will beep and perform the hard reset.

ASC1204 Default.png

  Note: Using Option 1, the IP address of controller will not be reset. Only the door permission and access control log that will be removed. 


Option 2: hard reset using DIP switch

ASC1204B Reset.jpg

Your access controller is now set to factory default settings.

IP Address: 192.168.0.2             Username: admin                Password: 123456