Difference between revisions of "CameraGrey"
(→Gray screen appears in the IPC.) |
|||
| Line 1: | Line 1: | ||
==Gray screen appears in the IPC.== | ==Gray screen appears in the IPC.== | ||
| − | + | * Gray screen appears in the IPC, it can recover after restart under the state of power off. Power cycle the device. | |
| − | + | * Gray screen appears repeatedly. Check length of the cable run or try different cables. Check POE on switch or NVR. It could be also caused insufficient power supply. | |
| − | + | * Check if the IPC power supply mode and power adapter are too far away from the IPC. | |
| − | |||
| − | |||
[[Category:Troubleshoot]] | [[Category:Troubleshoot]] | ||
Latest revision as of 21:26, 1 September 2016
Gray screen appears in the IPC.
- Gray screen appears in the IPC, it can recover after restart under the state of power off. Power cycle the device.
- Gray screen appears repeatedly. Check length of the cable run or try different cables. Check POE on switch or NVR. It could be also caused insufficient power supply.
- Check if the IPC power supply mode and power adapter are too far away from the IPC.
