Difference between revisions of ":Step by Step Test"

(Step by Step Instructions)
(Step by Step Instructions)
Line 21: Line 21:
 
File:NVRDeviceInitialization16.jpg|8. '''Date and Time''' - Make sure to properly set up your time zone to assure accurate time readings. You can also configure Daylight Saving Time (DST). When finished click on "Apply" and then click "Next" to proceed.
 
File:NVRDeviceInitialization16.jpg|8. '''Date and Time''' - Make sure to properly set up your time zone to assure accurate time readings. You can also configure Daylight Saving Time (DST). When finished click on "Apply" and then click "Next" to proceed.
 
File:NVRDeviceInitialization17.jpg|9. '''TCP/IP''' - To edit the IP Address on the recorder's NIC click on the pencil icon. You can now set a Static IP or enable DHCP to let the recorder grab an IP Address from the network, once done click "OK" and then "Next" to finish the setup.
 
File:NVRDeviceInitialization17.jpg|9. '''TCP/IP''' - To edit the IP Address on the recorder's NIC click on the pencil icon. You can now set a Static IP or enable DHCP to let the recorder grab an IP Address from the network, once done click "OK" and then "Next" to finish the setup.
 +
File:NVRDeviceInitialization20.jpg|10. '''Remote Access''' - P2P (Easy4IP): By checking this box, it will connect you to Dahua's P2P server and will allow you to remote to your device. If TCP/IP was set properly for your network, the status will show as "online".
 +
File:NVRDeviceInitialization27.jpg|11.'''Camera Registration''' - To initialize the device from the NVR check the camera(s) that you want and click on "Initialize"  -  Keep the box checked if you want to sync the password and E-mail to the camera and click on "Next"
 +
File:NVRDeviceInitialization29.jpg|12. Modify the IP Address and click on "Next"  -  Wait for the initialization to finish and the "Finished" button will activate, click on it to proceed.
 +
File:NVRDeviceInitialization32.jpg|13. Check the camera you just initialized and click on "Add"
 
</gallery>
 
</gallery>
  
 
+
'''Warning''' - Do not ignore step 5, it's your only way to reset the password. Master Codes no longer work.
'''Warning''' - Do not ignore this step, it's your only way to reset the password. Master Codes no longer work.
 
 
 
10. '''Remote Access''' - P2P (Easy4IP): By checking this box, it will connect you to Dahua's P2P server and will allow you to remote to your device. If TCP/IP was set properly for your network, the status will show as "online".
 
 
 
 
'''NOTE''' The QR code on the left will direct you to the smartphone application. The QR code on the right will allow you scan the SN of your device.
 
'''NOTE''' The QR code on the left will direct you to the smartphone application. The QR code on the right will allow you scan the SN of your device.
 
[[File:NVRDeviceInitialization20.jpg|600px]]
 
 
 
11.'''Camera Registration''' - To initialize the device from the NVR check the camera(s) that you want and click on "Initialize"  -  Keep the box checked if you want to sync the password and E-mail to the camera and click on "Next"
 
 
[[File:NVRDeviceInitialization27.jpg|600px]]
 
[[File:NVRDeviceInitialization28.jpg|600px]]
 
 
Modify the IP Address and click on "Next"  -  Wait for the initialization to finish and the "Finished" button will activate, click on it to proceed.
 
 
[[File:NVRDeviceInitialization29.jpg|600px]]
 
[[File:NVRDeviceInitialization31.jpg|600px]]
 
 
Check the camera you just initialized and click on "Add"
 
 
[[File:NVRDeviceInitialization32.jpg|600px]]
 

Revision as of 02:14, 14 February 2018

Step by Step Test

Device Initialization

NVR Device Initialization

WARNING!

Failure to setup, "Device Initialization" will result in an RMA, if you forget your password, and skipped this setup process.

Prerequisites

  • Dahua NVR, DVR, or XVR running the latest firmware
  • A display connected to your Dahua recorder

Video Instructions

Step by Step Instructions

Warning - Do not ignore step 5, it's your only way to reset the password. Master Codes no longer work. NOTE The QR code on the left will direct you to the smartphone application. The QR code on the right will allow you scan the SN of your device.