Difference between revisions of ":Step by Step Test"

(Step by Step Instructions)
(Step by Step Instructions)
Line 11: Line 11:
 
<embedvideo service="youtube">https://www.youtube.com/watch?v=31ZHFa-LmDE&feature=youtu.be</embedvideo>
 
<embedvideo service="youtube">https://www.youtube.com/watch?v=31ZHFa-LmDE&feature=youtu.be</embedvideo>
 
===Step by Step Instructions===
 
===Step by Step Instructions===
<gallery mode="slideshow">
+
<gallery mode=packed-overlay>
 
File:NVRDeviceInitialization1.jpeg|1. Connect the NVR to the display and power it on.
 
File:NVRDeviceInitialization1.jpeg|1. Connect the NVR to the display and power it on.
 
Image:NVRDeviceInitialization2.jpg|2.'''Enter Password''' - You will be prompted to change the default admin password. Make sure it's at least 8 characters long and contain letters, numbers, and symbols. (At least two of the three types.)
 
Image:NVRDeviceInitialization2.jpg|2.'''Enter Password''' - You will be prompted to change the default admin password. Make sure it's at least 8 characters long and contain letters, numbers, and symbols. (At least two of the three types.)

Revision as of 02:24, 14 February 2018

Step by Step Test

Device Initialization

NVR Device Initialization

WARNING!

Failure to setup, "Device Initialization" will result in an RMA, if you forget your password, and skipped this setup process.

Prerequisites

  • Dahua NVR, DVR, or XVR running the latest firmware
  • A display connected to your Dahua recorder

Video Instructions

Step by Step Instructions

Warning - Do not ignore step 5, it's your only way to reset the password. Master Codes no longer work. NOTE The QR code on the left will direct you to the smartphone application. The QR code on the right will allow you scan the SN of your device.