NVR/Basic Setup/Navigation Bar
You need to go to the Main menu->Setting->System->General to enable navigation bar function; otherwise you can not see the following interface.
(This function is for some series only.)
ClickClick any screen split mode; HDMI2 screen can display corresponding screens. Now you can control two screens.
Note
- Screen 2 funciton is null if tour is in process. Please disable tour funciton first,
- Right now, the screen 2 operation can only be realized on the navigation bar. The operations on the right-click menu are for screen 1 only.
Output Screen
Select corresponding window-split mode and output channels.
Tour Enable tour, the icon becomes, you can see the tour is in process.
PTZ System goes to the PTZ control interface.
Color System goes to the color interface. Please make sure system is in one-channel mode.
System goes to search interface.
System goes to alarm status interface. This is to view device status and channel status.
Channel Info System goes to the channel information setup interface. This is to view information of the corresponding channel.
Remote Device System goes to the remote device interface.
System goes to the network interface. It is to set network IP address, default gateway and etc.
System goes to the HDD manager interface. It is to view and manage HDD information.
System goes to the USB Manager interface. It is to view USB information, backup and update.