Difference between revisions of "SmartPSS/Resume Last Preview"

(Step by Step Instructions)
(Step by Step Instructions)
Line 36: Line 36:
 
[[File:resumesmartpss1.png|500px]]
 
[[File:resumesmartpss1.png|500px]]
  
7. On the top you will see a Live View tab. Click on live view tab. From here you will be able to see a live view of the cameras you selected from the previous steps.
+
7. On the top you will see a Live View tab. Click on live view tab.  
  
 
[[File:resumesmartpss6.png|500px]]
 
[[File:resumesmartpss6.png|500px]]
 +
 +
* From here you will be able to see a live view of the cameras you selected from the previous steps.
  
 
[[File:resumesmartpss7.png|500px]]
 
[[File:resumesmartpss7.png|500px]]

Revision as of 23:07, 18 January 2018

Resume Last Preview on SmartPSS 2.0 and above

Description

Automatically resume last preview of cameras when logging into SmartPSS.

Prerequisites

  • SmartPSS 2.0 and above.
  • Dahua Devices already added to SmartPSS

Video Instructions

Step by Step Instructions

1. Log into SmartPSS.

Resumesmartpss1.png

2. From the main menu click on live view.

Resumesmartpss2.png

3. From the left hand side select and open the cameras that are to be on resume last preview.

Resumesmartpss3.png

4. On the top right click on the System Config icon.

Resumesmartpss4.png

5. Under Preview and Playback check off Resume last Preview -> Select "Apply" and "Save"

Resumesmartpss5.png

6. Log out or close SmartPSS and log back into SmartPSS.

Resumesmartpss1.png

7. On the top you will see a Live View tab. Click on live view tab.

Resumesmartpss6.png

  • From here you will be able to see a live view of the cameras you selected from the previous steps.

Resumesmartpss7.png