Difference between revisions of "SmartPSS/Resume Last Preview"

(Video Instruction)
(Step by Step Instructions)
(11 intermediate revisions by the same user not shown)
Line 6: Line 6:
 
===Prerequisites===
 
===Prerequisites===
 
* SmartPSS 2.0 and above.
 
* SmartPSS 2.0 and above.
* Devices already added to SmartPSS
+
* Dahua Devices already added to SmartPSS
  
 
===Video Instructions===
 
===Video Instructions===
Line 14: Line 14:
 
1. Log into SmartPSS.
 
1. Log into SmartPSS.
  
2. From the main menu click on live view.  
+
[[File:resumesmartpss1.png|500px]]
  
3. From the left hand side select and open the cameras that are to be on live view.  
+
2. From the main menu click on live view.
  
4. Click on the settings icon
+
[[File:resumesmartpss2.png|500px]]
  
5. Under Preview and Playback check off Resume last Preview.  
+
3. From the left hand side select and open the cameras that are to be on resume last preview.
  
6. Select "Apply" and "Save"
+
[[File:resumesmartpss3.png|500px]]
  
7. Log out and log back into SmartPSS.
+
4. On the top right, click on the System Config icon.
  
8. On the top you will see a Live View tab. Click on live view tab. From here you will be able to see a live view of the cameras you selected from the previous steps.
+
[[File:resumesmartpss4.png|500px]]
 +
 
 +
5. Under Preview and Playback check off Resume last Preview -> Select "Apply" and "Save"
 +
 
 +
[[File:resumesmartpss5.png|500px]]
 +
 
 +
6. Log out or close SmartPSS and log back into SmartPSS.
 +
 
 +
[[File:resumesmartpss1.png|500px]]
 +
 
 +
7. On the top you will see a Live View tab. Click on live view tab.
 +
 
 +
[[File:resumesmartpss6.png|500px]]
 +
 
 +
* From here you will be able to see a live view of the cameras you selected from the previous steps automatically open.
 +
 
 +
[[File:resumesmartpss7.png|500px]]
 +
 
 +
[[Category:Troubleshoot]]
 +
 
 +
[[Category:SmartPSS]]

Revision as of 01:26, 19 January 2018

Resume Last Preview on SmartPSS 2.0 and above

Description

Automatically resume last preview of cameras when logging into SmartPSS.

Prerequisites

  • SmartPSS 2.0 and above.
  • Dahua Devices already added to SmartPSS

Video Instructions

Step by Step Instructions

1. Log into SmartPSS.

Resumesmartpss1.png

2. From the main menu click on live view.

Resumesmartpss2.png

3. From the left hand side select and open the cameras that are to be on resume last preview.

Resumesmartpss3.png

4. On the top right, click on the System Config icon.

Resumesmartpss4.png

5. Under Preview and Playback check off Resume last Preview -> Select "Apply" and "Save"

Resumesmartpss5.png

6. Log out or close SmartPSS and log back into SmartPSS.

Resumesmartpss1.png

7. On the top you will see a Live View tab. Click on live view tab.

Resumesmartpss6.png

  • From here you will be able to see a live view of the cameras you selected from the previous steps automatically open.

Resumesmartpss7.png