Difference between revisions of "Software/ConfigTool 4 05/Locate"
(→Prerequisites) |
(→Step by Step Instructions) |
||
| Line 13: | Line 13: | ||
===Step by Step Instructions=== | ===Step by Step Instructions=== | ||
| − | 1. Install ConfigTool, Run and Open. | + | 1. Install ConfigTool, Run and Open. |
| − | |||
| − | [ | + | * [https://dahuawiki.com/ConfigTool ConfigTool Downloads] |
2. From here you will see Dahua devices on the same LAN should show once Configtool is opened. Refresh if Dahua devices do not show. You can also manually find the IP address of the camera by typing in the address of the device in the search. | 2. From here you will see Dahua devices on the same LAN should show once Configtool is opened. Refresh if Dahua devices do not show. You can also manually find the IP address of the camera by typing in the address of the device in the search. | ||
Revision as of 20:36, 14 February 2018
Contents
Dahua ConfigTool Version 4.05 Locate Dahua Device
Description
How to locate Dahua devices on LAN and modify IP address of Dahua Device via Configtool
Prerequisites
- ConfigTool Version 4.05
- ConfigTool Downloads
- Dahua Devices on the same IP range as PC.
- Note: If your IP Camera is connected to the back of an NVR, these instructions will not apply. Please see, "How to Connect IP Camera to NVR"
Video Instructions
Step by Step Instructions
1. Install ConfigTool, Run and Open.
2. From here you will see Dahua devices on the same LAN should show once Configtool is opened. Refresh if Dahua devices do not show. You can also manually find the IP address of the camera by typing in the address of the device in the search.
3. To modify IP address of selected device, select the edit button -> select DHCP or for static change the IP address according to the networks range settings -> Select "OK" to save changes.
- Refresh to see changed IP address.
