Difference between revisions of "Software/ConfigTool 4 05/Locate"
(→Prerequisites) |
(→Prerequisites) |
||
| Line 5: | Line 5: | ||
===Prerequisites=== | ===Prerequisites=== | ||
* ConfigTool Version 4.05 | * ConfigTool Version 4.05 | ||
| − | + | * [https://dahuawiki.com/ConfigTool ConfigTool Downloads] | |
* Dahua Devices on the same LAN as PC. | * Dahua Devices on the same LAN as PC. | ||
* Note: If your IP Camera is connected to the back of an NVR, these instructions will not apply. Please see, "[[ConnectIPCtoNVR|How to Connect IP Camera to NVR]]" | * Note: If your IP Camera is connected to the back of an NVR, these instructions will not apply. Please see, "[[ConnectIPCtoNVR|How to Connect IP Camera to NVR]]" | ||
Revision as of 21:32, 14 February 2018
Contents
Dahua ConfigTool Version 4.05 Locate Dahua Device
Description
How to locate Dahua devices on LAN and modify IP address of Dahua Device via Configtool
Prerequisites
- ConfigTool Version 4.05
- ConfigTool Downloads
- Dahua Devices on the same LAN as PC.
- Note: If your IP Camera is connected to the back of an NVR, these instructions will not apply. Please see, "How to Connect IP Camera to NVR"
Video Instructions
Step by Step Instructions
1. Install ConfigTool, Run and Open.
2. From here you will see Dahua devices on the same LAN should show once Configtool is opened. Refresh if Dahua devices do not show. You can also manually find the IP address of the camera by typing in the address of the device in the search.
3. To modify IP address of selected device, select the edit button -> select DHCP or for static change the IP address according to the networks range settings -> Select "OK" to save changes.
- Refresh to see modified IP address.
