Software/Dahua Toolbox/Login Fix

Revision as of 21:37, 18 April 2018 by AlexS (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Dahua Toolbox: Troubleshoot Login Issue

Description

This article will cover troubleshooting login issues with the Dahua Toolbox software

Prerequisites

  • Dahua Toolbox installed on a Windows PC
  • A Dahua Toolbox account

Step by Step Instructions

1. Open the Dahua Toolbox and enter your account information in the e-mail and password fields and select "Sign In".
If you are able to login, you can stop here. If you get the error "Bad Network, offline login failed", continue to Step 2.

ToolboxLoginTroubleshoot1.JPG

2. Go to the Windows Start menu and open the Conrol Panel. Select "Network and Internet".

ToolboxLoginTroubleshoot2.jpg

3. Select "Network and Sharing Center".

ToolboxLoginTroubleshoot3.jpg

4. On the left-hand side select "Change adapter settings".

ToolboxLoginTroubleshoot4.jpg

5. Right click on the network adapter for the network you are currently connected to the internet with.

ToolboxLoginTroubleshoot5.JPG

6. Select "Properties" from the drop-down menu.

ToolboxLoginTroubleshoot6.jpg

7. Highlight "Internet Protocol Version 4 (TCP/IPv4)" and select "Properties".

ToolboxLoginTroubleshoot7.jpg

8. Select the "Use the following DNS server addresses" radio button.
Then type in "8.8.8.8" next to "Prefered DNS server". And "8.8.4.4" next to "Alternate DNS server".
Then select the "OK" button at the bottom to save the settings.

ToolboxLoginTroubleshoot8.jpg

9. Open Dahua Toolbox and type in your Dahua Toolbox e-mail and password. Then select "Sign In".

ToolboxLoginTroubleshoot9.JPG

10. If you are able to connect, you should see the text below:

ToolboxLoginTroubleshoot10.jpg