Difference between revisions of "Troubleshoot/NVR/Troubleshoot Date and Time"

(Step by Step Instructions)
 
Line 11: Line 11:
  
 
1. Make sure the "Time Zone" is set correctly.
 
1. Make sure the "Time Zone" is set correctly.
 +
 +
[[File:timezonereference001.jpg|600x600px]]
  
 
[[file:DateandTimeTroubleshoot1.png|550px]]
 
[[file:DateandTimeTroubleshoot1.png|550px]]

Latest revision as of 22:39, 29 March 2017

How to set the date and time

Time display is not correct.

There are following possibilities: Explanation:

  • Setup is not correct
  • Battery contact is not correct or voltage is too low.
  • Crystal is broken.

Step by Step Instructions

1. Make sure the "Time Zone" is set correctly.

Timezonereference001.jpg

DateandTimeTroubleshoot1.png

GMT stands for Greenwich Mean Time.

  • Eastern Standard Time: GMT - 05:00
  • Central Standard Time: GMT - 06:00
  • Mountain Standard Time: GMT - 07:00
  • Pacific Standard Time: GMT - 08:00
  • Alaskan Standard Time: GMT - 09:00
  • Hawaii-Aleutian Standard Time: GMT - 10:00

2. Setup DST, if applicable.

  • Daylight Savings Time begins the 2nd week of March
  • Daylight Savings Time ends the 1st week of November.

DateandTimeTroubleshoot2.png

3. "Sync PC" if all else fails.

DateandTimeTroubleshoot3.png

4. Click, "OK" to save your changes.

DateandTimeTroubleshoot4.png