Difference between revisions of "Troubleshoot/NVR/Video Loss All Cameras"
(→Video Loss on Multiple Cameras) |
|||
| Line 4: | Line 4: | ||
* Firmware may be old. Please upgrade to the latest version. | * Firmware may be old. Please upgrade to the latest version. | ||
* Brightness is 0. Please restore factory default setup. | * Brightness is 0. Please restore factory default setup. | ||
| − | * There is no video input signal or it is too weak, due to the length of cable. | + | * If There is no video input signal or it is too weak, due to the length of cable, find shorter cable. |
| − | * Check privacy mask setup or your screen saver. | + | * Check privacy mask setup or your screen saver and remove them if possible. |
| − | * DVR hardware malfunctions. | + | * If DVR hardware malfunctions then change hardware. |
| − | * Not enough bandwidth. | + | * If Not enough bandwidth then check internet. |
| − | * Insufficient power | + | * If Insufficient power then check and change power supply. |
| − | * Check if you are using You are using aluminum braid or copper braid cable. | + | * Check if you are using You are using aluminum braid or copper braid cable and change if not. |
[[Category:Troubleshoot]] | [[Category:Troubleshoot]] | ||
Latest revision as of 04:05, 17 August 2016
Video Loss on Multiple Cameras
There are following possibilities:
- Firmware may be old. Please upgrade to the latest version.
- Brightness is 0. Please restore factory default setup.
- If There is no video input signal or it is too weak, due to the length of cable, find shorter cable.
- Check privacy mask setup or your screen saver and remove them if possible.
- If DVR hardware malfunctions then change hardware.
- If Not enough bandwidth then check internet.
- If Insufficient power then check and change power supply.
- Check if you are using You are using aluminum braid or copper braid cable and change if not.
