Difference between revisions of "VideoLossCam"
(→After I connected to the IP channel, there one*window output is OK, but there is no multiple*window output.) |
|||
| Line 2: | Line 2: | ||
There are following possibilities: | There are following possibilities: | ||
| + | * Lower, FPS, Bitrate, change CBR to VBR and set to sub-stream on some of the cameras. | ||
* Check the sub stream of the camera has been enabled or not. | * Check the sub stream of the camera has been enabled or not. | ||
* Check the sub stream type of the camera is H.264 or not. | * Check the sub stream type of the camera is H.264 or not. | ||
Latest revision as of 21:29, 1 September 2016
After I connected to the IP channel, there one*window output is OK, but there is no multiple*window output.
There are following possibilities:
- Lower, FPS, Bitrate, change CBR to VBR and set to sub-stream on some of the cameras.
- Check the sub stream of the camera has been enabled or not.
- Check the sub stream type of the camera is H.264 or not.
- Check the device supports camera sub stream resolution or not (such as 960H, D1,CIF,etc.)
