Difference between revisions of "VideoLossAnalog"

(Created page with "===I connect the general analog camera to the device, there is no video output.=== There are following possibilities: *Check camera power supplying, data cable connection and...")
 
(I connect the general analog camera to the device, there is no video output.)
 
(4 intermediate revisions by 3 users not shown)
Line 1: Line 1:
 
===I connect the general analog camera to the device, there is no video output.===
 
===I connect the general analog camera to the device, there is no video output.===
 
There are following possibilities:
 
There are following possibilities:
*Check camera power supplying, data cable connection and etc.  
+
 
*This series device does not support the analog camera of all brands. Please make sure the device supports general standard definition analog camera.
+
* Check camera power supplying, data cable connection and etc. There might not be sufficient power from the power source. You can use a voltage tester if you have one on hand.
 +
* Check the length of cable run. Refer to the specifications for the limitations on the cable length.
 +
* This series device does not support the analog camera of all brands. Please make sure the device supports general standard definition analog camera.
 +
* If there is no video, check the coax connection. Unsecured faulty connections will result in no video or intermittent video.
 +
 
 +
[[Category:Troubleshoot]]

Latest revision as of 17:52, 1 September 2016

I connect the general analog camera to the device, there is no video output.

There are following possibilities:

  • Check camera power supplying, data cable connection and etc. There might not be sufficient power from the power source. You can use a voltage tester if you have one on hand.
  • Check the length of cable run. Refer to the specifications for the limitations on the cable length.
  • This series device does not support the analog camera of all brands. Please make sure the device supports general standard definition analog camera.
  • If there is no video, check the coax connection. Unsecured faulty connections will result in no video or intermittent video.