Difference between revisions of "Template:IVS Scene Change SystemUI NewGUI"
(Created page with " ===Description=== ===Prerequisites=== ===Video Instructions=== <embedvideo service="youtube">https://youtu.be/y4fZVpnBPvA</embedvideo> ===Step By Step Instructions===") |
|||
| (3 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
| − | |||
===Description=== | ===Description=== | ||
| + | This guide will show how to setup the Scene Change IVS feature at the SystemUI with NewGUI | ||
===Prerequisites=== | ===Prerequisites=== | ||
| + | * Dahua device with Scene Change IVS feature | ||
| + | ===Video Instructions=== | ||
| + | <embedvideo service="youtube">https://youtu.be/w0qpVs9mOgw</embedvideo> | ||
| + | ===Step By Step Instructions=== | ||
| + | 1. From the Main Menu | ||
| + | |||
| + | Click Event | ||
| + | |||
| + | [[File:Scene_Change_-_SystemUI_New_-_1.jpg|500px]] | ||
| + | |||
| + | 2. Click Video Detection | ||
| + | |||
| + | [[File:Scene_Change_-_SystemUI_New_-_2.jpg|500px]] | ||
| + | |||
| + | 3. Click Scene Change | ||
| + | |||
| + | [[File:Scene_Change_-_SystemUI_New_-_3.jpg|500px]] | ||
| + | |||
| + | 4. Use the dropdown box to select the Channel | ||
| + | |||
| + | Click the Enable setting to enable the IVS feature | ||
| + | |||
| + | [[File:Scene_Change_-_SystemUI_New_-_4.jpg|500px]] | ||
| + | |||
| + | 5. Configure the desired parameters for alarm triggers (actions when the IVS rule is triggered) | ||
| + | |||
| + | [[File:Scene_Change_-_SystemUI_New_-_5.jpg|500px]] | ||
| − | + | 6. Click Apply to save all settings | |
| − | |||
| − | + | [[File:Scene_Change_-_SystemUI_New_-_6.jpg|500px]] | |
Latest revision as of 18:44, 9 December 2019
Description
This guide will show how to setup the Scene Change IVS feature at the SystemUI with NewGUI
Prerequisites
- Dahua device with Scene Change IVS feature
Video Instructions
Step By Step Instructions
1. From the Main Menu
Click Event
2. Click Video Detection
3. Click Scene Change
4. Use the dropdown box to select the Channel
Click the Enable setting to enable the IVS feature
5. Configure the desired parameters for alarm triggers (actions when the IVS rule is triggered)
6. Click Apply to save all settings
