Difference between revisions of "Template:DMSS/Instructions/LincX2PRO Floodlight Setup"

(→‎Step by Step Instructions)
 
(3 intermediate revisions by the same user not shown)
Line 1: Line 1:
 +
1. Launch the DMSS Mobile App.
 +
<br>Tap on '''Device''' at the bottom to access your added device list.
 +
<br>Select one of your added devices that you wish to setup/modify Floodlight Settings for. Tap on '''...''' .
  
−
==Step by Step Instructions==
+
[[File:LincX2ProPIRFloodlight1.png|400px]]
−
1. Launch DMSS Mobile App.
 
  
−
2. Tap on [[File:DMSS_Icon_Live_Home.png|30px]] '''Home''' to access your added device list.
+
2. Select '''Device Details'''
 +
 
 +
[[File:LincX2ProPIRFloodlight2.png|400px]]
 +
 
 +
3. Scroll down and select '''Floodlight Settings'''
 +
 
 +
[[File:LincX2ProPIRFloodlight3.png|400px]]
 +
 
 +
4. Tap on '''Select Mode'''
 +
 
 +
[[File:LincX2ProPIRFloodlight4.png|400px]]
 +
 
 +
5. Select which mode you want the floodlight to follow: '''Motion Activation''', '''Manual''', '''Schedule''', or '''PIR'''
 +
<br>Tap on '''OK'''
 +
 
 +
[[File:LincX2ProPIRFloodlight5.png|400px]]
 +
 
 +
===PIR Mode===
 +
 
 +
1. Set the '''Select Mode''' to '''PIR'''
 +
 
 +
[[File:LincX2ProPIRFloodlight4.png|400px]]
 +
 
 +
2. Select '''Brightness'''
 +
 
 +
[[File:LincX2ProPIRFloodlight6.png|400px]]
 +
 
 +
3. Adjust the slider under '''Brightness Settings''' to the desired brightness level for the floodlight.
 +
<br>When you are done, select '''Save''' at the top
 +
 
 +
[[File:LincX2ProPIRFloodlight7.png|400px]]
 +
 
 +
4. Select '''Color Temperature'''
 +
 
 +
[[File:LincX2ProPIRFloodlight8.png|400px]]
 +
 
 +
5. Select '''Cool''' if you want a blue-ish color for the light or select '''Warm''' if you want a yellow-ish color for the light
 +
 
 +
[[File:LincX2ProPIRFloodlight9.png|400px]]
 +
 
 +
6. Select '''PIR Region'''
 +
 
 +
[[File:LincX2ProPIRFloodlight10.png|400px]]
 +
 
 +
7. Drag the slider on the right for the amount of distance you want the PIR to monitor. (100% = 10m [32.81 ft])
 +
<br>Tap the 3 zones either ON or OFF.
 +
<br>Select '''Save''' at the top
 +
 
 +
[[File:LincX2ProPIRFloodlight11.png|800px]]
 +
 
 +
8. Select '''Light Duration'''
 +
 
 +
[[File:LincX2ProPIRFloodlight12.png|400px]]
 +
 
 +
9. Select the duration the light will stay on once activated.
 +
<br>Tap on '''OK'''
 +
 
 +
[[File:LincX2ProPIRFloodlight13.png|400px]]
 +
 
 +
===Motion Activation===
 +
 
 +
1. Set the '''Select Mode''' to '''Motion Activation'''
 +
 
 +
[[File:LincX2ProPIRFloodlight14.png|400px]]
 +
 
 +
2. Select '''Brightness'''
 +
 
 +
[[File:LincX2ProPIRFloodlight6.png|400px]]
 +
 
 +
3. Adjust the slider under '''Brightness Settings''' to the desired brightness level for the floodlight.
 +
<br>When you are done, select '''Save''' at the top
 +
 
 +
[[File:LincX2ProPIRFloodlight7.png|400px]]
  
−
3. Select one of your added device that you wish to setup/modify Floodlight Settings for. Tap on '''...''' icon.
+
4. Select '''Color Temperature'''
  
−
[[File:L26 C26 - Modify PIR Detection Zone - DMSS - 1.jpg|400px]]
+
[[File:LincX2ProPIRFloodlight8.png|400px]]
  
−
2. Select '''Device Details'''
+
5. Select '''Cool''' if you want a blue-ish color for the light or select '''Warm''' if you want a yellow-ish color for the light
 +
 
 +
[[File:LincX2ProPIRFloodlight9.png|400px]]
 +
 
 +
6. Select '''Light Duration'''
 +
 
 +
[[File:LincX2ProPIRFloodlight12.png|400px]]
 +
 
 +
7. Select the duration the light will stay on once activated.
 +
<br>Tap on '''OK'''
 +
 
 +
[[File:LincX2ProPIRFloodlight13.png|400px]]
 +
 
 +
===Manual Mode===
 +
 
 +
1. Set the '''Select Mode''' to '''Manual'''
 +
 
 +
[[File:LincX2ProPIRFloodlight15.png|400px]]
 +
 
 +
2. Select '''Brightness'''
 +
 
 +
[[File:LincX2ProPIRFloodlight6.png|400px]]
 +
 
 +
3. Adjust the slider under '''Brightness Settings''' to the desired brightness level for the floodlight.
 +
<br>When you are done, select '''Save''' at the top
 +
 
 +
[[File:LincX2ProPIRFloodlight7.png|400px]]
 +
 
 +
4. Select '''Color Temperature'''
 +
 
 +
[[File:LincX2ProPIRFloodlight8.png|400px]]
 +
 
 +
5. Select '''Cool''' if you want a blue-ish color for the light or select '''Warm''' if you want a yellow-ish color for the light
 +
 
 +
[[File:LincX2ProPIRFloodlight9.png|400px]]
 +
 
 +
===Schedule Mode===
 +
 
 +
1. Set the '''Select Mode''' to '''Schedule'''
 +
 
 +
[[File:LincX2ProPIRFloodlight16.png|400px]]
 +
 
 +
2. Select '''Brightness'''
 +
 
 +
[[File:LincX2ProPIRFloodlight6.png|400px]]
 +
 
 +
3. Adjust the slider under '''Brightness Settings''' to the desired brightness level for the floodlight.
 +
<br>When you are done, select '''Save''' at the top
 +
 
 +
[[File:LincX2ProPIRFloodlight7.png|400px]]
 +
 
 +
4. Select '''Color Temperature'''
 +
 
 +
[[File:LincX2ProPIRFloodlight8.png|400px]]
 +
 
 +
5. Select '''Cool''' if you want a blue-ish color for the light or select '''Warm''' if you want a yellow-ish color for the light
 +
 
 +
[[File:LincX2ProPIRFloodlight9.png|400px]]
 +
 
 +
6. Select '''Period'''
 +
 
 +
[[File:LincX2ProPIRFloodlight17.png|400px]]
 +
 
 +
7. Select any day of the week to modify the schedule for that day
 +
 
 +
[[File:LincX2ProPIRFloodlight18.png|400px]]
  
−
[[File:L26 C26 - Modify PIR Detection Zone - DMSS - 2.jpg|400px]]
+
8. Select the time period you want to modify or tap on '''+ Add''' if you want to add an additional time period
  
−
3. Select Floodlight
+
[[File:LincX2ProPIRFloodlight24.png|400px]]
  
−
[[File:L26 C26 - Modify PIR Detection Zone - DMSS - 3.jpg|400px]]
+
9. Adjust the start time and end time to when you want the floodlight to be active.
 +
<br>When you are done making changes, select '''OK'''
  
−
Under this section the following settings that can be configured:
+
[[File:LincX2ProPIRFloodlight22.png|400px]]
  
−
'''Mode:''' Manual/Motion Activation/Dusk to Dawn
+
10. Select '''Repeat'''
  
−
Configure how the Floodlight is activated
+
[[File:LincX2ProPIRFloodlight23.png|400px]]
  
−
[[File:L26 C26 - Modify PIR Detection Zone - DMSS - 4.jpg|400px]]
+
11. Select either '''Whole Week''' or a specific day for which day(s) this schedule will apply to, in addition to the day you already selected.
 +
<br>Then select '''Save'''
  
−
[[File:L26 C26 - Modify PIR Detection Zone - DMSS - 5.jpg|400px]]
+
[[File:LincX2ProPIRFloodlight20.png|400px]]
  
−
'''Light on Time:''' The time frame the lights will be active after motion is triggered.
+
12. When you are done making changes, select '''Save'''
  
−
[[File:L26 C26 - Modify PIR Detection Zone - DMSS - 8.jpg|400px]]
+
[[File:LincX2ProPIRFloodlight21.png|400px]]

Latest revision as of 19:15, 8 March 2024

1. Launch the DMSS Mobile App.
Tap on Device at the bottom to access your added device list.
Select one of your added devices that you wish to setup/modify Floodlight Settings for. Tap on ... .

LincX2ProPIRFloodlight1.png

2. Select Device Details

LincX2ProPIRFloodlight2.png

3. Scroll down and select Floodlight Settings

LincX2ProPIRFloodlight3.png

4. Tap on Select Mode

LincX2ProPIRFloodlight4.png

5. Select which mode you want the floodlight to follow: Motion Activation, Manual, Schedule, or PIR
Tap on OK

LincX2ProPIRFloodlight5.png

PIR Mode

1. Set the Select Mode to PIR

LincX2ProPIRFloodlight4.png

2. Select Brightness

LincX2ProPIRFloodlight6.png

3. Adjust the slider under Brightness Settings to the desired brightness level for the floodlight.
When you are done, select Save at the top

LincX2ProPIRFloodlight7.png

4. Select Color Temperature

LincX2ProPIRFloodlight8.png

5. Select Cool if you want a blue-ish color for the light or select Warm if you want a yellow-ish color for the light

LincX2ProPIRFloodlight9.png

6. Select PIR Region

LincX2ProPIRFloodlight10.png

7. Drag the slider on the right for the amount of distance you want the PIR to monitor. (100% = 10m [32.81 ft])
Tap the 3 zones either ON or OFF.
Select Save at the top

LincX2ProPIRFloodlight11.png

8. Select Light Duration

LincX2ProPIRFloodlight12.png

9. Select the duration the light will stay on once activated.
Tap on OK

LincX2ProPIRFloodlight13.png

Motion Activation

1. Set the Select Mode to Motion Activation

LincX2ProPIRFloodlight14.png

2. Select Brightness

LincX2ProPIRFloodlight6.png

3. Adjust the slider under Brightness Settings to the desired brightness level for the floodlight.
When you are done, select Save at the top

LincX2ProPIRFloodlight7.png

4. Select Color Temperature

LincX2ProPIRFloodlight8.png

5. Select Cool if you want a blue-ish color for the light or select Warm if you want a yellow-ish color for the light

LincX2ProPIRFloodlight9.png

6. Select Light Duration

LincX2ProPIRFloodlight12.png

7. Select the duration the light will stay on once activated.
Tap on OK

LincX2ProPIRFloodlight13.png

Manual Mode

1. Set the Select Mode to Manual

LincX2ProPIRFloodlight15.png

2. Select Brightness

LincX2ProPIRFloodlight6.png

3. Adjust the slider under Brightness Settings to the desired brightness level for the floodlight.
When you are done, select Save at the top

LincX2ProPIRFloodlight7.png

4. Select Color Temperature

LincX2ProPIRFloodlight8.png

5. Select Cool if you want a blue-ish color for the light or select Warm if you want a yellow-ish color for the light

LincX2ProPIRFloodlight9.png

Schedule Mode

1. Set the Select Mode to Schedule

LincX2ProPIRFloodlight16.png

2. Select Brightness

LincX2ProPIRFloodlight6.png

3. Adjust the slider under Brightness Settings to the desired brightness level for the floodlight.
When you are done, select Save at the top

LincX2ProPIRFloodlight7.png

4. Select Color Temperature

LincX2ProPIRFloodlight8.png

5. Select Cool if you want a blue-ish color for the light or select Warm if you want a yellow-ish color for the light

LincX2ProPIRFloodlight9.png

6. Select Period

LincX2ProPIRFloodlight17.png

7. Select any day of the week to modify the schedule for that day

LincX2ProPIRFloodlight18.png

8. Select the time period you want to modify or tap on + Add if you want to add an additional time period

LincX2ProPIRFloodlight24.png

9. Adjust the start time and end time to when you want the floodlight to be active.
When you are done making changes, select OK

LincX2ProPIRFloodlight22.png

10. Select Repeat

LincX2ProPIRFloodlight23.png

11. Select either Whole Week or a specific day for which day(s) this schedule will apply to, in addition to the day you already selected.
Then select Save

LincX2ProPIRFloodlight20.png

12. When you are done making changes, select Save

LincX2ProPIRFloodlight21.png

Retrieved from "https://DahuaWiki.com/index.php?title=Template:DMSS/Instructions/LincX2PRO_Floodlight_Setup&oldid=84173"