Difference between revisions of "CameraGrey"

(Gray screen appears in the IPC.)
 
(2 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
==Gray screen appears in the IPC.==
 
==Gray screen appears in the IPC.==
Phenomenon: gray screen appears in the IPC, it can recover after restart under the state of power off, gray screen appears repeatedly. 
+
* Gray screen appears in the IPC, it can recover after restart under the state of power off. Power cycle the device.
 
+
* Gray screen appears repeatedly. Check length of the cable run or try different cables. Check POE on switch or NVR. It could be also caused insufficient power supply.
Possible reason: Caused by insufficient power supply. 
+
* Check if the IPC power supply mode and power adapter are too far away from the IPC.
 
 
Solution: Check if the IPC power supply mode and power adapter are too far away from the IPC.
 
  
 +
[[Category:Troubleshoot]]
 +
[[Category:IP_Camera]]
 +
[[Category:Remote_Access]]
  
  
[[Category:IP_Camera]]
+
{{Template:Footer:Remote_Access}}
[[Category:Remote_Access]]
 

Latest revision as of 21:26, 1 September 2016

Gray screen appears in the IPC.

  • Gray screen appears in the IPC, it can recover after restart under the state of power off. Power cycle the device.
  • Gray screen appears repeatedly. Check length of the cable run or try different cables. Check POE on switch or NVR. It could be also caused insufficient power supply.
  • Check if the IPC power supply mode and power adapter are too far away from the IPC.