Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
NVR/2 Way Talk Setup
Prequisites
- IPC with audio in and audio out.
- External powered external mic.The IP Camera will not power the mic.
- Depending on some IPC models there might be a built in Mic. Please refer to Dahuasecurity.com for device specifications.
- If using an IPC capable of audio in and out, the NVR is an option. You can log directly into the IPC camera via Dahua WEB Service.
For IPC
1. Log into IPC via webservice.
2. From the Setup Tab Select Camera ➞ Select Audio.
3. Check off enable ➞ select encode mode ➞ select sampling frequency. Repeat process for sub stream if being used.
4. Choose audio in type ➞ enable or disable noise filter ➞ You can adjust the speaker volume and mic level ➞ Be sure to click on save to save changes made.
5.On live view you can click on the audio icon to hear the audio feed of the camera location.
6.Click on the Mic icon to talk.
