Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Remote Access/Embed Video Feed On Website
Contents
Embed Video Feed on Website
Description
This article will show you how to take a video feed from an IP Camera, DVR, or NVR and embed the live video on a website.
Prerequisites
- Internet Explorer or Firefox Note: Chrome will not work.
- IP Camera, DVR, or NVR that is connected to a network
- Local IP address of device
- Port 554 forwarded in the gateway of the network the IP Camera, DVR or NVR is connected
- Website where you want to host the video
Example of Working Code
Video Instructions
Step by Step Instructions
1. From a PC on the same network as the IP Camera, DVR, or NVR; go to www.CanYouSeeMe.org and check port 554. Port 554 should be open. Note the IP address displayed on this page. We will need that later.
2.
