Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
FLIR/Add FLIR Recorder To gDMSS via IP
Contents
How to Add A FLIR Recorder to gDMSS via IP
Description
This guide will show how to add a FLIR Recorder to the gDMSS mobile app via IP
Prerequisites
- gDMSS installed on the mobile device
- FLIR Recorder, connected to network
- FLIR Recorder network information - (IP, HTTP Port)
- FLIR Recorder Device ID
- Username/password for FLIR Recorder
Video Instructions
Step by Step Instructions
1. Open gDMSS
From the Preview window press the Home icon
2. Select Device
3. Press the '+' to add a device
4. Select 'IP/Domain' from the pop-up
5. Select 'NVR'
6. Enter all information for the device:
- Address - IP address of recorder
- Port - HTTP Port of recorder
- Device name - nickname for device in app
- Username - username
- Device Password - password
7. Once all information has been entered, press the Save icon in the top right of the screen
8. The app will begin to connect to the device
9. Once the device has been successfully connected it will load into Live Preview
