:Face Detection

Revision as of 20:02, 5 December 2019 by Arran Williams (talk | contribs)

Face Detection

Installation Requirements

  • Installation Height no more than 3.5m
  • Camera Depression Angle of 10 to 15°

frinstallationrequirements.png 300px

Instructions

Icon for type SystemUI Old.pngSystemUI Old

Description

This guide will show how to enable Face Detection in the New SystemUI on a Dahua device

Prerequisites

  • Dahua device with Face Detection feature and New SystemUI

Video Instructions

==Step By Step Instructions==

Icon for type SystemUI New.pngSystemUI New

Description

This guide will show how to enable Face Detection in the New SystemUI on a Dahua device

Prerequisites

  • Dahua device with Face Detection feature and New SystemUI

Video Instructions

Step By Step Instructions

1. From the Main Menu

Select AI

Face Detect - New SystemUI - 1.jpg

2. A Smart Plan must be created for the channel

Select Parameters > Smart Plan

Face Detect - New SystemUI - 2.jpg

3. Use the drop-down box to select the channel

Face Detect - New SystemUI - 3.jpg

4. Click to select/enable Face Detect

Face Detect - New SystemUI - 4.jpg

5. Click Apply to save

Face Detect - New SystemUI - 5.jpg

6. Now the Face Detection feature must be enabled

Select Parameters > Face Detection

Face Detect - New SystemUI - 6.jpg

7. Use the drop-down box to select the channel

Toggle the switch to Enable

The Face Detection feature is now enabled

Face Detect - New SystemUI - 7.jpg

8. Use the additional parameters to adjust other settings for the Face Detection feature:

Face Detect - New SystemUI - 8.jpg

9. The Live View can now show live Face Detection

Face Detect - New SystemUI - End.jpg

Icon for type WebUI Old.pngWebUI Old

Description

Face detection is to detect if there is any human face appearing in the video, and capture the face then send it to the NVR for analysis and processing, it can activate snapshot, record and alarm.

FaceDetect.png

Prerequisites

  • Intelligent Network Camera.
  • A HDCVI Camera that is connected to a HDCVI DVR that has intelligent features.
  • Updated firmware that supports intelligent features.
  • Internet Explorer.

Video Instructions

Step By Step Instructions

1.Log into device using the Web Service.

Facedetwebservice1.png

2.Select Setup -> Select Event -> Select Face Detection

Facedetwebservice2.png

3. Click “Enable”.

Face Detect1.png

4. Click face enhancement to enhance the face image display.

Face Detect2.png

5. Select max and min size, draw max and min target for target filtering. This step is to filter target, which can’t be operated under default status.

Face Detect3.png

6. Activate record, alarm, email and snapshot according to the requirements.

Face Detect4.png

7. Target filter can set max target and min target, which means it can detect max and min target.

Face Detect5.png

8. Click ok to complete settings.

Face Detect6.png

Icon for type WebUI New.pngWebUI New

Description

Provide steps necessary to configure Face detection on the new web UI

Prerequisites

  • Windows Computer
  • Dahua NVR on new UI
  • Dahua Camera Capable of Face Detection

Video Instructions

Step By Step Instructions

1) From the home page of your Recorder Select AI

Fdnewuihome.png

2) Select Parameters, Then Select Smart Plan.

Fdnewuismartplan.png

3) Select the proper channel from the drop down and ensure Face Detection is selected and ok. Then select Face Detection on the left.

Fdnewuifacedetection.png

4) Enable face detection and ensure that the target area is correctly Set to where you wish to detect faces and select ok.

Fdnewuifacedetectionarea.png

Icon for type SmartPSS.pngSmartPSS

Description

Face detection is to detect if there is any human face appearing in the video, and capture the face then send it to the NVR for analysis and processing, it can activate snapshot, record and alarm.

Prerequisites

  • SmartPSS 2.0
  • IVS capable Camera

Video Instructions

Step by Step Instructions

1.Log into SmartPSS

2.From the homepage select live view.