Template:IVS Heatmap WebUI New

Revision as of 23:07, 5 December 2019 by Gerardo Chavez (talk | contribs) (Step By Step Instructions)

Description

This article will cover the setup of Heat Mapping on an N52B3P and will apply to any device using this UI that supports the Heat Mapping function.

Prerequisites

  • An NVR that supports Heat Mapping
  • A camera that supports Heat Mapping
  • A Windows PC on the same local network as the NVR

Video Instructions

Step By Step Instructions

1. From the main page of the recorder web UI, select AI as shown in the image below, and choose Parameters in the left-hand menu.


2. From Parameters, Select Smart Plan and select the channel which Heat Mapping will be set for and make sure the Heat Mapping icon is Highlighted as in the image below.

HeatMap NWGUI-3.PNG


3. Next choose the Heat Map option under the Parameters menu and again select the channel that Heat Mapping will be applied to. Check the box for Enable and if a schedule is need this can be set using the Period button


4. Once the Heat Map has been set up, the data can be queried under Smart Search and then Heat Map, the results will be show as they appear below. HeatMap NWGUI-6.PNG