Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Template:IVS Scene Change WebUI New
Revision as of 20:44, 9 December 2019 by Marques.Phillips (talk | contribs)
Description
This guide will show how to setup the Scene Change IVS feature at the WebUI with NewGUI
Prerequisites
- Dahua device with Scene Change IVS feature
Video Instructions
Step By Step Instructions
1. From the Main Menu
Click Alarm
2. Click Video Detection
3. Click Scene Change
4. Use the dropdown box to select the Channel
Click the Enable setting to enable the IVS feature
5. Configure the desired parameters for alarm triggers (actions when the IVS rule is triggered)
6. Click OK to save all settings