Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.

Template:SMD WebUI Old

Revision as of 18:22, 24 January 2020 by Marques.Phillips (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Prerequisites

  • Dahua device that supports SMD

Video Instructions

Step by Step Instructions

1. Enter the username and password for the device

Click Login

SMD - WebUI Old - 1.jpg

2. Click Setting

SMD - WebUI Old - 2.jpg

3. Click Event > Video Detection

SMD - WebUI Old - 2-1.jpg

4. Check the box to enable the motion detection

Configure any additional motion detection parameters

SMD - WebUI Old - 2-2.jpg

5. Click Save

SMD - WebUI Old - 2-3.jpg

6. Click Event > Smart Motion Detection

SMD - WebUI Old - 3.jpg

7. Check the box to enable the Smart Motion Detection

SMD - WebUI Old - 4.jpg

8. Use the additional options to configure the parameters of SMD:

  • Effective Target - Human, Vehicle, or Both
  • Sensitivity

SMD - WebUI Old - 5.jpg

9. Click Save

SMD - WebUI Old - 6.jpg

Retrieved from "https://DahuaWiki.com/index.php?title=Template:SMD_WebUI_Old&oldid=53247"