Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Template:Alarm Config Settings
Revision as of 17:35, 29 October 2020 by Marques.Phillips (talk | contribs)
Description
Alarms of various types can be setup and configured to respond in different ways when triggered.
Setting | Description |
---|---|
Period | Sets the time and days of the week this alarm can be triggered |
Post-Record | Sets the amount of seconds that are recorded after the alarm event is done being triggered, if "Record Channel" is enabled |
Alarm Out | Sets alarm outputs that will be activate when this alarm is triggered |
Record Channel | Sets which channels are recorded when the alarm is triggered |
Tour | Enables a tour when the alarm is triggered |
PTZ Activation | Sets the behavior of a PTZ camera connected to the same recorder when the alarm is triggered |
Buzzer | Makes the recorder emit an audible beeping noise when the alarm is triggered |
Alarm Upload | |
Log | Records the event information in the system log when the alarm is triggered |
Send Email | Sends an email, via the settings set in the Email section of the Network settings on the recorder, when the alarm is triggered |