Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.

Access Control/How to Add DH-ASC2204C-S to DSS Express V8

Revision as of 22:30, 1 October 2021 by William.V (talk | contribs)

Description

This article will go over how to add the DH-ASC2204C-S to DSS Express V8

Prerequisites

Step by Step Instructions

1. Open DSS Client and go to Configuration by clicking on the wrench icon

How to Add DH-ASC2204C-S to DSS Express V8-1.png

2. Select Device

How to Add DH-ASC2204C-S to DSS Express V8-2.png

3. Click on Add to start adding the Access Controller

How to Add DH-ASC2204C-S to DSS Express V8-3.png

4. Enter the IP Address and Login credentials of the controller. Also be sure to change the Device Category to "Access Control". Then click on Add to proceed

Note: If you do not have an option for "Access Control", you will need to purchase an Access Control License for DSS Express V8

How to Add DH-ASC2204C-S to DSS Express V8-4.png

5. DSS Express will attempt to login to the unit. If successful, it'll load the controller's information. Enter a Name for the device and click on Ok

How to Add DH-ASC2204C-S to DSS Express V8-5.png

6. The Controller will go Online after a few seconds of loading

How to Add DH-ASC2204C-S to DSS Express V8-6.png