Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Troubleshoot/NVR/Browser Troubleshoot
Unable to Login from Web Browser
- For Windows 8 or 8.1 you make sure you IE Browser's security setting are set to low for that IP address.
- Or you can install client-end software of lower version.
- It is possible that the ActiveX control has been disabled.
- No dx8.1 or higher. Please upgrade display card driver.
- Network setup or connection error.
- Password or user name is invalid.
Step by Step Instructions
1. Delete any previous version of Web Rec. How to Delete Web Rec
2. Make sure you are using Internet Explorer (Safari on OSX). Not Edge, Chrome, Firefox, or any other browser.
3. Configure Internet Explorer's security settings. How to Configure Internet Explorer's Security Settings
4. Ensure no Malware or Viruses are installed on the computer.
5. Set as a trusted site.
6. Change credentials from Recorder if credentials are invalid.
7. Close out IE and reboot PC.
8. If accessing outside of network, make sure device is set up for remote viewing such as DahuaDDNS or port forwarding.
9. Ensure you have " http://" in front of the domain name or IP address. Eg. http://170.16.17.116/
8. If none of the above will work, use SmartPSS.
