Access Control/How to Add PINs to Users on DSSExpress

Revision as of 15:29, 5 October 2021 by William.V (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Description

PINs are used to open doors using a 6-digit code.
To enter codes you will need to enter the USER ID followed by # then the 6-digit code then again followed by #
Example: 1#123456#

Prerequisistes

Step by Step Instructions

1. Go to Personnel Management

How to add PINs to Users on DSS Express-1.png

2. Double click on the user you would like to add an PIN to

How to add PINs to Users on DSS Express-2.png

3. Navigate over to Authentication

How to add PINs to Users on DSS Express-3.png

4. Click on Change under the Password section

How to add PINs to Users on DSS Express-4.png

5. Enter a 6-digit code.

How to add PINs to Users on DSS Express-5.png

  • NOTE: To use the PIN you will need to enter the User's ID then # 6-digit PIN then # again

Example: 1#123456#

Learn How to add Cards to Users on DSS Express