Access Control/Products/ASI1212D/How to Setup Ring Function on DHI-ASI1212D

Revision as of 19:58, 11 August 2021 by AlexS (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

How to Setup Ring Function on DHI-ASI1212D

Description

This guide demonstrates wiring the 'Ring' function. A light is in place to show when the relay has been successfully triggered

Prerequisites

  • DHI-ASI1212D
  • A third party device that will be activated to "Ring"

NOTE: Please reference the device Wiring Guide for the correct relay connections for your purposes

Step by Step Instructions

1. Check the wiring diagram to confirm what connections need to be made

For Ring function:

ASI1212DRing.jpg

The Red and Black wires labeled CON3 are used

2. Wire the connections in line with the desired devices (and power if required) to complete a circuit.

In this example a light (and external power) is being used to show when the relay has been successfully triggered.

ASI1212D Wiring.jpg

3. After wiring the circuit press the Ring button and the relay should engage

In this example, the light will turn on

ASI1212D Wiring 2.jpg