Alarm Center

Revision as of 17:49, 28 June 2016 by Qi (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Alarm Center

Please Note: This interface is reserved for you to develop. System can upload alarm signal to the alarm center when local alarm occurs. Before you use alarm center, please set server IP, port and etc. When an alarm occurs, system can send out data as the protocol defined, so the client-end can get the data.


Step 1. From Main Menu Select Select ➞ Network ➞ Alarm Center

Alarm center wiki1.png


Step 2. Select Enable ➞ Select Protocol Type ➞ Input Host IP and Port ➞ Input Self Report time ➞ Select Save.

Alarm center wiki2.png