DateandTimeIPC

Revision as of 19:26, 23 June 2023 by AlexS (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

How to Set Date and Time on an IP Camera

Note: If your camera is connected to the back of an NVR, you do not need to set the date and time on each camera. The NVR will do that automatically.

1. Open a web browser and input the IP address of the Camera.

4. Login with the admin credentials

5. After logging in, go to Setup->System->General->Date&Time

6. Set the date, time, DST, and NTP settings.

7. Click, "Save"

Retrieved from "https://DahuaWiki.com/index.php?title=DateandTimeIPC&oldid=82311"