Doorbell/DB11/Initial Setup

Revision as of 21:36, 11 August 2020 by Nicky Gunakan (talk | contribs) (Prerequisites)

DB11 Initial Setup

Description

How to setup DB11 on Mobile App

Prerequisites

Video Instructions

Step by Step Instruction

DMSS New Icon.png DMSS

1. Open DMSS App then go to Me menu. If you are not logged into an account, it is required to do so before proceeding to adding the device.

LincX2ProAddDevice1.png LincX2ProAddDevice2.png

2.Tap on Device, and tap on + button on the top right hand corner, then choose SN/Scan.

LincX2ProAddDevice3.png LincX2ProAddDevice4.png

3. Scan the QR code of the device that is located on the back or side.

DMSS LincX2Pro Scan QR.png

4. It will show the Serial Number under "Device SN and Security Code".
Tap on Next.

LincX2ProAddDevice5.png

5. Make sure your device is connected to the power and the indicator light flashes blue. Tap on Next.

LincX2ProAddDevice6.png

6. When a prompt comes up, Tap on Connect to continue.

LincX2ProAddDevice7.png

7. Setup the device password. Then tap on Next.

LincX2ProAddDevice8.png

8. Choose the WIFI network the LincX2Pro Device will be connecting to.

LincX2ProAddDevice9.png

9. Enter Wifi password and tap on Next to continue the setup.

LincX2ProAddDevice10.png

10. Wait while the device connects to the Wifi.

LincX2ProAddDevice11.png

11. Enter the user-defined Device Name. Then tap on Save.

DB11InitialSetup12.png

12. Choose if Audio Recording is enabled or not, and adjust the Timezone and Daylight Savings Time. Then tap on Done.

DB11InitialSetup13.png

13. Select the existing door chime you have at the location. Electronic Chime or Mechanical Chime, or if you are using a Wireless door chime, you should see this pop-up under Wireless Chime. Then tap on Completed on the bottom. If you don't have any sort of external chime, tap on Skip at the top instead.

LincX2ProAddDevice14.png

14. Once setup is complete, you will be able to view the live view of your Doorbell Camera.

DB11InitialSetup14.png

15. Go to Me > General. Make sure that the Notification Switch is enabled and now you should receive a call notification when doorbell button is pushed.

DMSS Account Notification.png

IDMSS Icon.png iDMSS/gDMSS

Step by Step Instructions

1. Open iDMSS or gDMSS then scan the QR code on the DB11.
1. Scan QR Code.PNG

2. If the iDMSS or gDMSS are not logged, it is required to do so before proceeding to adding the device.
2. Login Into DMSS Account.PNG

3. Follow the on-screen instructions and wait for the status light before pressing button located on the back of the DB11 device. After the device is pressed, a vocal message will be heard.
3. Pressing Reset Button to Get Started.PNG

4. When a prompt comes up, press "Join" to continue.
4. Join the Device.PNG

5. Setup the device password.
5. Setup Device Password.PNG

6. Choose the WIFI network the DB11 will be connecting to.
6. Choose the WIFI Network.PNG

7. Follow the on-screen instructions to continue with the setup.
7. On-screen Intructions.PNG

8. Enter the user-defined Device Name. In the example, we use "DB11".
8. Enter Device Name.PNG

9. Finalize the settings to complete the setup.
9. Finalize The Settings.PNG

10. Go to "Me"

LincX2PRO MD Setup-11.png

11. Make sure that the Notification Switch is enabled and now you should receive a call notification when doorbell button is pushed.

LincX2PRO MD Setup-12.png